Total
151 CVE
| CVE | Vendors | Products | Updated | CVSS v2 | CVSS v3 |
|---|---|---|---|---|---|
| CVE-2023-52617 | 2 Debian, Linux | 2 Debian Linux, Linux Kernel | 2025-04-08 | N/A | 4.4 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: PCI: switchtec: Fix stdev_release() crash after surprise hot remove A PCI device hot removal may occur while stdev->cdev is held open. The call to stdev_release() then happens during close or exit, at a point way past switchtec_pci_remove(). Otherwise the last ref would vanish with the trailing put_device(), just before return. At that later point in time, the devm cleanup has already removed the stdev->mmio_mrpc mapping. Also, the stdev->pdev reference was not a counted one. Therefore, in DMA mode, the iowrite32() in stdev_release() will cause a fatal page fault, and the subsequent dma_free_coherent(), if reached, would pass a stale &stdev->pdev->dev pointer. Fix by moving MRPC DMA shutdown into switchtec_pci_remove(), after stdev_kill(). Counting the stdev->pdev ref is now optional, but may prevent future accidents. Reproducible via the script at https://lore.kernel.org/r/20231113212150.96410-1-dns@arista.com | |||||
| CVE-2005-2293 | 1 Oracle | 1 Forms Builder | 2025-04-03 | 2.1 LOW | 5.5 MEDIUM |
| Oracle Formsbuilder 9.0.4 stores database usernames and passwords in a temporary file, which is not deleted after it is used, which allows local users to obtain sensitive information. | |||||
| CVE-2002-2068 | 1 Tolvanen | 1 Eraser | 2025-04-03 | 5.0 MEDIUM | 7.5 HIGH |
| Eraser 5.3 does not clear Windows alternate data streams that are attached to files on NTFS file systems, which allows attackers to recover sensitive information that was supposed to be deleted. | |||||
| CVE-2002-2066 | 1 Jetico | 1 Bcwipe | 2025-04-03 | 5.0 MEDIUM | 7.5 HIGH |
| BestCrypt BCWipe 1.0.7 and 2.0 through 2.35.1 does not clear Windows alternate data streams that are attached to files on NTFS file systems, which allows attackers to recover sensitive information that was supposed to be deleted. | |||||
| CVE-2002-2067 | 1 East-tec | 1 Eraser | 2025-04-03 | 5.0 MEDIUM | 7.5 HIGH |
| East-Tec Eraser 2002 does not clear Windows alternate data streams that are attached to files on NTFS file systems, which allows attackers to recover sensitive information that was supposed to be deleted. | |||||
| CVE-2002-2070 | 1 Accessdata | 1 Secureclean | 2025-04-03 | 5.0 MEDIUM | 7.5 HIGH |
| SecureClean 3 build 2.0 does not clear Windows alternate data streams that are attached to files on NTFS file systems, which allows attackers to recover sensitive information that was supposed to be deleted. | |||||
| CVE-2002-2069 | 1 Pgp | 1 Personal Privacy | 2025-04-03 | 5.0 MEDIUM | 7.5 HIGH |
| PGP 6.x and 7.x does not clear Windows alternate data streams that are attached to files on NTFS file systems, which allows attackers to recover sensitive information that was supposed to be deleted. | |||||
| CVE-2005-1744 | 1 Bea | 1 Weblogic Server | 2025-04-03 | 7.5 HIGH | 9.8 CRITICAL |
| BEA WebLogic Server and WebLogic Express 7.0 through Service Pack 5 does not log out users when an application is redeployed, which allows those users to continue to access the application without having to log in again, which may be in violation of newly changed security constraints or role mappings. | |||||
| CVE-2000-0552 | 1 Icq | 1 Icq | 2025-04-03 | 2.1 LOW | 5.5 MEDIUM |
| ICQwebmail client for ICQ 2000A creates a world readable temporary file during login and does not delete it, which allows local users to obtain sensitive information. | |||||
| CVE-2002-0788 | 1 Pgp | 3 Corporate Desktop, Freeware, Personal Security | 2025-04-03 | 2.1 LOW | 5.5 MEDIUM |
| An interaction between PGP 7.0.3 with the "wipe deleted files" option, when used on Windows Encrypted File System (EFS), creates a cleartext temporary files that cannot be wiped or deleted due to strong permissions, which could allow certain local users or attackers with physical access to obtain cleartext information. | |||||
| CVE-2024-50385 | 2025-04-02 | N/A | 6.5 MEDIUM | ||
| A denial of service vulnerability exists in the NetX Component HTTP server functionality of STMicroelectronics X-CUBE-AZRTOS-WL 2.0.0. A specially crafted network packet can lead to denial of service. An attacker can send a malicious packet to trigger this vulnerability.This vulnerability affects X-CUBE-AZRTOS-F7 NetX Duo Component HTTP Server HTTP server v 1.1.0. This HTTP server implementation is contained in this file - x-cube-azrtos-f7\Middlewares\ST\netxduo\addons\http\nxd_http_server.c | |||||
| CVE-2024-50384 | 2025-04-02 | N/A | 6.5 MEDIUM | ||
| A denial of service vulnerability exists in the NetX Component HTTP server functionality of STMicroelectronics X-CUBE-AZRTOS-WL 2.0.0. A specially crafted network packet can lead to denial of service. An attacker can send a malicious packet to trigger this vulnerability.This vulnerability affects X-CUBE-AZRTOS-F7 NetX Duo Web Component HTTP server v 1.1.0. This HTTP server implementation is contained in this file - x-cube-azrtos-f7\Middlewares\ST\netxduo\addons\web\nx_web_http_server.c | |||||
| CVE-2024-26832 | 1 Linux | 1 Linux Kernel | 2025-04-02 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: mm: zswap: fix missing folio cleanup in writeback race path In zswap_writeback_entry(), after we get a folio from __read_swap_cache_async(), we grab the tree lock again to check that the swap entry was not invalidated and recycled. If it was, we delete the folio we just added to the swap cache and exit. However, __read_swap_cache_async() returns the folio locked when it is newly allocated, which is always true for this path, and the folio is ref'd. Make sure to unlock and put the folio before returning. This was discovered by code inspection, probably because this path handles a race condition that should not happen often, and the bug would not crash the system, it will only strand the folio indefinitely. | |||||
| CVE-2024-26841 | 1 Linux | 1 Linux Kernel | 2025-04-02 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: LoongArch: Update cpu_sibling_map when disabling nonboot CPUs Update cpu_sibling_map when disabling nonboot CPUs by defining & calling clear_cpu_sibling_map(), otherwise we get such errors on SMT systems: jump label: negative count! WARNING: CPU: 6 PID: 45 at kernel/jump_label.c:263 __static_key_slow_dec_cpuslocked+0xec/0x100 CPU: 6 PID: 45 Comm: cpuhp/6 Not tainted 6.8.0-rc5+ #1340 pc 90000000004c302c ra 90000000004c302c tp 90000001005bc000 sp 90000001005bfd20 a0 000000000000001b a1 900000000224c278 a2 90000001005bfb58 a3 900000000224c280 a4 900000000224c278 a5 90000001005bfb50 a6 0000000000000001 a7 0000000000000001 t0 ce87a4763eb5234a t1 ce87a4763eb5234a t2 0000000000000000 t3 0000000000000000 t4 0000000000000006 t5 0000000000000000 t6 0000000000000064 t7 0000000000001964 t8 000000000009ebf6 u0 9000000001f2a068 s9 0000000000000000 s0 900000000246a2d8 s1 ffffffffffffffff s2 ffffffffffffffff s3 90000000021518c0 s4 0000000000000040 s5 9000000002151058 s6 9000000009828e40 s7 00000000000000b4 s8 0000000000000006 ra: 90000000004c302c __static_key_slow_dec_cpuslocked+0xec/0x100 ERA: 90000000004c302c __static_key_slow_dec_cpuslocked+0xec/0x100 CRMD: 000000b0 (PLV0 -IE -DA +PG DACF=CC DACM=CC -WE) PRMD: 00000004 (PPLV0 +PIE -PWE) EUEN: 00000000 (-FPE -SXE -ASXE -BTE) ECFG: 00071c1c (LIE=2-4,10-12 VS=7) ESTAT: 000c0000 [BRK] (IS= ECode=12 EsubCode=0) PRID: 0014d000 (Loongson-64bit, Loongson-3A6000-HV) CPU: 6 PID: 45 Comm: cpuhp/6 Not tainted 6.8.0-rc5+ #1340 Stack : 0000000000000000 900000000203f258 900000000179afc8 90000001005bc000 90000001005bf980 0000000000000000 90000001005bf988 9000000001fe0be0 900000000224c280 900000000224c278 90000001005bf8c0 0000000000000001 0000000000000001 ce87a4763eb5234a 0000000007f38000 90000001003f8cc0 0000000000000000 0000000000000006 0000000000000000 4c206e6f73676e6f 6f4c203a656d616e 000000000009ec99 0000000007f38000 0000000000000000 900000000214b000 9000000001fe0be0 0000000000000004 0000000000000000 0000000000000107 0000000000000009 ffffffffffafdabe 00000000000000b4 0000000000000006 90000000004c302c 9000000000224528 00005555939a0c7c 00000000000000b0 0000000000000004 0000000000000000 0000000000071c1c ... Call Trace: [<9000000000224528>] show_stack+0x48/0x1a0 [<900000000179afc8>] dump_stack_lvl+0x78/0xa0 [<9000000000263ed0>] __warn+0x90/0x1a0 [<90000000017419b8>] report_bug+0x1b8/0x280 [<900000000179c564>] do_bp+0x264/0x420 [<90000000004c302c>] __static_key_slow_dec_cpuslocked+0xec/0x100 [<90000000002b4d7c>] sched_cpu_deactivate+0x2fc/0x300 [<9000000000266498>] cpuhp_invoke_callback+0x178/0x8a0 [<9000000000267f70>] cpuhp_thread_fun+0xf0/0x240 [<90000000002a117c>] smpboot_thread_fn+0x1dc/0x2e0 [<900000000029a720>] kthread+0x140/0x160 [<9000000000222288>] ret_from_kernel_thread+0xc/0xa4 | |||||
| CVE-2024-26803 | 1 Linux | 1 Linux Kernel | 2025-04-01 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: net: veth: clear GRO when clearing XDP even when down veth sets NETIF_F_GRO automatically when XDP is enabled, because both features use the same NAPI machinery. The logic to clear NETIF_F_GRO sits in veth_disable_xdp() which is called both on ndo_stop and when XDP is turned off. To avoid the flag from being cleared when the device is brought down, the clearing is skipped when IFF_UP is not set. Bringing the device down should indeed not modify its features. Unfortunately, this means that clearing is also skipped when XDP is disabled _while_ the device is down. And there's nothing on the open path to bring the device features back into sync. IOW if user enables XDP, disables it and then brings the device up we'll end up with a stray GRO flag set but no NAPI instances. We don't depend on the GRO flag on the datapath, so the datapath won't crash. We will crash (or hang), however, next time features are sync'ed (either by user via ethtool or peer changing its config). The GRO flag will go away, and veth will try to disable the NAPIs. But the open path never created them since XDP was off, the GRO flag was a stray. If NAPI was initialized before we'll hang in napi_disable(). If it never was we'll crash trying to stop uninitialized hrtimer. Move the GRO flag updates to the XDP enable / disable paths, instead of mixing them with the ndo_open / ndo_close paths. | |||||
| CVE-2024-4767 | 2 Debian, Mozilla | 3 Debian Linux, Firefox, Thunderbird | 2025-04-01 | N/A | 4.3 MEDIUM |
| If the `browser.privatebrowsing.autostart` preference is enabled, IndexedDB files were not properly deleted when the window was closed. This preference is disabled by default in Firefox. This vulnerability affects Firefox < 126, Firefox ESR < 115.11, and Thunderbird < 115.11. | |||||
| CVE-2024-26825 | 2 Debian, Linux | 2 Debian Linux, Linux Kernel | 2025-03-27 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: nfc: nci: free rx_data_reassembly skb on NCI device cleanup rx_data_reassembly skb is stored during NCI data exchange for processing fragmented packets. It is dropped only when the last fragment is processed or when an NTF packet with NCI_OP_RF_DEACTIVATE_NTF opcode is received. However, the NCI device may be deallocated before that which leads to skb leak. As by design the rx_data_reassembly skb is bound to the NCI device and nothing prevents the device to be freed before the skb is processed in some way and cleaned, free it on the NCI device cleanup. Found by Linux Verification Center (linuxtesting.org) with Syzkaller. | |||||
| CVE-2024-2403 | 2 Devolutions, Microsoft | 2 Remote Desktop Manager, Windows | 2025-03-26 | N/A | 5.9 MEDIUM |
| Improper cleanup in temporary file handling component in Devolutions Remote Desktop Manager 2024.1.12 and earlier on Windows allows an attacker that compromised a user endpoint, under specific circumstances, to access sensitive information via residual files in the temporary directory. | |||||
| CVE-2024-26756 | 1 Linux | 1 Linux Kernel | 2025-03-17 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: md: Don't register sync_thread for reshape directly Currently, if reshape is interrupted, then reassemble the array will register sync_thread directly from pers->run(), in this case 'MD_RECOVERY_RUNNING' is set directly, however, there is no guarantee that md_do_sync() will be executed, hence stop_sync_thread() will hang because 'MD_RECOVERY_RUNNING' can't be cleared. Last patch make sure that md_do_sync() will set MD_RECOVERY_DONE, however, following hang can still be triggered by dm-raid test shell/lvconvert-raid-reshape.sh occasionally: [root@fedora ~]# cat /proc/1982/stack [<0>] stop_sync_thread+0x1ab/0x270 [md_mod] [<0>] md_frozen_sync_thread+0x5c/0xa0 [md_mod] [<0>] raid_presuspend+0x1e/0x70 [dm_raid] [<0>] dm_table_presuspend_targets+0x40/0xb0 [dm_mod] [<0>] __dm_destroy+0x2a5/0x310 [dm_mod] [<0>] dm_destroy+0x16/0x30 [dm_mod] [<0>] dev_remove+0x165/0x290 [dm_mod] [<0>] ctl_ioctl+0x4bb/0x7b0 [dm_mod] [<0>] dm_ctl_ioctl+0x11/0x20 [dm_mod] [<0>] vfs_ioctl+0x21/0x60 [<0>] __x64_sys_ioctl+0xb9/0xe0 [<0>] do_syscall_64+0xc6/0x230 [<0>] entry_SYSCALL_64_after_hwframe+0x6c/0x74 Meanwhile mddev->recovery is: MD_RECOVERY_RUNNING | MD_RECOVERY_INTR | MD_RECOVERY_RESHAPE | MD_RECOVERY_FROZEN Fix this problem by remove the code to register sync_thread directly from raid10 and raid5. And let md_check_recovery() to register sync_thread. | |||||
| CVE-2024-26687 | 2 Debian, Linux | 2 Debian Linux, Linux Kernel | 2025-03-17 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: xen/events: close evtchn after mapping cleanup shutdown_pirq and startup_pirq are not taking the irq_mapping_update_lock because they can't due to lock inversion. Both are called with the irq_desc->lock being taking. The lock order, however, is first irq_mapping_update_lock and then irq_desc->lock. This opens multiple races: - shutdown_pirq can be interrupted by a function that allocates an event channel: CPU0 CPU1 shutdown_pirq { xen_evtchn_close(e) __startup_pirq { EVTCHNOP_bind_pirq -> returns just freed evtchn e set_evtchn_to_irq(e, irq) } xen_irq_info_cleanup() { set_evtchn_to_irq(e, -1) } } Assume here event channel e refers here to the same event channel number. After this race the evtchn_to_irq mapping for e is invalid (-1). - __startup_pirq races with __unbind_from_irq in a similar way. Because __startup_pirq doesn't take irq_mapping_update_lock it can grab the evtchn that __unbind_from_irq is currently freeing and cleaning up. In this case even though the event channel is allocated, its mapping can be unset in evtchn_to_irq. The fix is to first cleanup the mappings and then close the event channel. In this way, when an event channel gets allocated it's potential previous evtchn_to_irq mappings are guaranteed to be unset already. This is also the reverse order of the allocation where first the event channel is allocated and then the mappings are setup. On a 5.10 kernel prior to commit 3fcdaf3d7634 ("xen/events: modify internal [un]bind interfaces"), we hit a BUG like the following during probing of NVMe devices. The issue is that during nvme_setup_io_queues, pci_free_irq is called for every device which results in a call to shutdown_pirq. With many nvme devices it's therefore likely to hit this race during boot because there will be multiple calls to shutdown_pirq and startup_pirq are running potentially in parallel. ------------[ cut here ]------------ blkfront: xvda: barrier or flush: disabled; persistent grants: enabled; indirect descriptors: enabled; bounce buffer: enabled kernel BUG at drivers/xen/events/events_base.c:499! invalid opcode: 0000 [#1] SMP PTI CPU: 44 PID: 375 Comm: kworker/u257:23 Not tainted 5.10.201-191.748.amzn2.x86_64 #1 Hardware name: Xen HVM domU, BIOS 4.11.amazon 08/24/2006 Workqueue: nvme-reset-wq nvme_reset_work RIP: 0010:bind_evtchn_to_cpu+0xdf/0xf0 Code: 5d 41 5e c3 cc cc cc cc 44 89 f7 e8 2b 55 ad ff 49 89 c5 48 85 c0 0f 84 64 ff ff ff 4c 8b 68 30 41 83 fe ff 0f 85 60 ff ff ff <0f> 0b 66 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 40 00 0f 1f 44 00 00 RSP: 0000:ffffc9000d533b08 EFLAGS: 00010046 RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000006 RDX: 0000000000000028 RSI: 00000000ffffffff RDI: 00000000ffffffff RBP: ffff888107419680 R08: 0000000000000000 R09: ffffffff82d72b00 R10: 0000000000000000 R11: 0000000000000000 R12: 00000000000001ed R13: 0000000000000000 R14: 00000000ffffffff R15: 0000000000000002 FS: 0000000000000000(0000) GS:ffff88bc8b500000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000000 CR3: 0000000002610001 CR4: 00000000001706e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: ? show_trace_log_lvl+0x1c1/0x2d9 ? show_trace_log_lvl+0x1c1/0x2d9 ? set_affinity_irq+0xdc/0x1c0 ? __die_body.cold+0x8/0xd ? die+0x2b/0x50 ? do_trap+0x90/0x110 ? bind_evtchn_to_cpu+0xdf/0xf0 ? do_error_trap+0x65/0x80 ? bind_evtchn_to_cpu+0xdf/0xf0 ? exc_invalid_op+0x4e/0x70 ? bind_evtchn_to_cpu+0xdf/0xf0 ? asm_exc_invalid_op+0x12/0x20 ? bind_evtchn_to_cpu+0xdf/0x ---truncated--- | |||||