Total
435 CVE
| CVE | Vendors | Products | Updated | CVSS v2 | CVSS v3 |
|---|---|---|---|---|---|
| CVE-2024-27031 | 1 Linux | 1 Linux Kernel | 2024-12-23 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: NFS: Fix nfs_netfs_issue_read() xarray locking for writeback interrupt The loop inside nfs_netfs_issue_read() currently does not disable interrupts while iterating through pages in the xarray to submit for NFS read. This is not safe though since after taking xa_lock, another page in the mapping could be processed for writeback inside an interrupt, and deadlock can occur. The fix is simple and clean if we use xa_for_each_range(), which handles the iteration with RCU while reducing code complexity. The problem is easily reproduced with the following test: mount -o vers=3,fsc 127.0.0.1:/export /mnt/nfs dd if=/dev/zero of=/mnt/nfs/file1.bin bs=4096 count=1 echo 3 > /proc/sys/vm/drop_caches dd if=/mnt/nfs/file1.bin of=/dev/null umount /mnt/nfs On the console with a lockdep-enabled kernel a message similar to the following will be seen: ================================ WARNING: inconsistent lock state 6.7.0-lockdbg+ #10 Not tainted -------------------------------- inconsistent {IN-SOFTIRQ-W} -> {SOFTIRQ-ON-W} usage. test5/1708 [HC0[0]:SC0[0]:HE1:SE1] takes: ffff888127baa598 (&xa->xa_lock#4){+.?.}-{3:3}, at: nfs_netfs_issue_read+0x1b2/0x4b0 [nfs] {IN-SOFTIRQ-W} state was registered at: lock_acquire+0x144/0x380 _raw_spin_lock_irqsave+0x4e/0xa0 __folio_end_writeback+0x17e/0x5c0 folio_end_writeback+0x93/0x1b0 iomap_finish_ioend+0xeb/0x6a0 blk_update_request+0x204/0x7f0 blk_mq_end_request+0x30/0x1c0 blk_complete_reqs+0x7e/0xa0 __do_softirq+0x113/0x544 __irq_exit_rcu+0xfe/0x120 irq_exit_rcu+0xe/0x20 sysvec_call_function_single+0x6f/0x90 asm_sysvec_call_function_single+0x1a/0x20 pv_native_safe_halt+0xf/0x20 default_idle+0x9/0x20 default_idle_call+0x67/0xa0 do_idle+0x2b5/0x300 cpu_startup_entry+0x34/0x40 start_secondary+0x19d/0x1c0 secondary_startup_64_no_verify+0x18f/0x19b irq event stamp: 176891 hardirqs last enabled at (176891): [<ffffffffa67a0be4>] _raw_spin_unlock_irqrestore+0x44/0x60 hardirqs last disabled at (176890): [<ffffffffa67a0899>] _raw_spin_lock_irqsave+0x79/0xa0 softirqs last enabled at (176646): [<ffffffffa515d91e>] __irq_exit_rcu+0xfe/0x120 softirqs last disabled at (176633): [<ffffffffa515d91e>] __irq_exit_rcu+0xfe/0x120 other info that might help us debug this: Possible unsafe locking scenario: CPU0 ---- lock(&xa->xa_lock#4); <Interrupt> lock(&xa->xa_lock#4); *** DEADLOCK *** 2 locks held by test5/1708: #0: ffff888127baa498 (&sb->s_type->i_mutex_key#22){++++}-{4:4}, at: nfs_start_io_read+0x28/0x90 [nfs] #1: ffff888127baa650 (mapping.invalidate_lock#3){.+.+}-{4:4}, at: page_cache_ra_unbounded+0xa4/0x280 stack backtrace: CPU: 6 PID: 1708 Comm: test5 Kdump: loaded Not tainted 6.7.0-lockdbg+ Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-1.fc39 04/01/2014 Call Trace: dump_stack_lvl+0x5b/0x90 mark_lock+0xb3f/0xd20 __lock_acquire+0x77b/0x3360 _raw_spin_lock+0x34/0x80 nfs_netfs_issue_read+0x1b2/0x4b0 [nfs] netfs_begin_read+0x77f/0x980 [netfs] nfs_netfs_readahead+0x45/0x60 [nfs] nfs_readahead+0x323/0x5a0 [nfs] read_pages+0xf3/0x5c0 page_cache_ra_unbounded+0x1c8/0x280 filemap_get_pages+0x38c/0xae0 filemap_read+0x206/0x5e0 nfs_file_read+0xb7/0x140 [nfs] vfs_read+0x2a9/0x460 ksys_read+0xb7/0x140 | |||||
| CVE-2024-27010 | 1 Linux | 1 Linux Kernel | 2024-12-23 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: net/sched: Fix mirred deadlock on device recursion When the mirred action is used on a classful egress qdisc and a packet is mirrored or redirected to self we hit a qdisc lock deadlock. See trace below. [..... other info removed for brevity....] [ 82.890906] [ 82.890906] ============================================ [ 82.890906] WARNING: possible recursive locking detected [ 82.890906] 6.8.0-05205-g77fadd89fe2d-dirty #213 Tainted: G W [ 82.890906] -------------------------------------------- [ 82.890906] ping/418 is trying to acquire lock: [ 82.890906] ffff888006994110 (&sch->q.lock){+.-.}-{3:3}, at: __dev_queue_xmit+0x1778/0x3550 [ 82.890906] [ 82.890906] but task is already holding lock: [ 82.890906] ffff888006994110 (&sch->q.lock){+.-.}-{3:3}, at: __dev_queue_xmit+0x1778/0x3550 [ 82.890906] [ 82.890906] other info that might help us debug this: [ 82.890906] Possible unsafe locking scenario: [ 82.890906] [ 82.890906] CPU0 [ 82.890906] ---- [ 82.890906] lock(&sch->q.lock); [ 82.890906] lock(&sch->q.lock); [ 82.890906] [ 82.890906] *** DEADLOCK *** [ 82.890906] [..... other info removed for brevity....] Example setup (eth0->eth0) to recreate tc qdisc add dev eth0 root handle 1: htb default 30 tc filter add dev eth0 handle 1: protocol ip prio 2 matchall \ action mirred egress redirect dev eth0 Another example(eth0->eth1->eth0) to recreate tc qdisc add dev eth0 root handle 1: htb default 30 tc filter add dev eth0 handle 1: protocol ip prio 2 matchall \ action mirred egress redirect dev eth1 tc qdisc add dev eth1 root handle 1: htb default 30 tc filter add dev eth1 handle 1: protocol ip prio 2 matchall \ action mirred egress redirect dev eth0 We fix this by adding an owner field (CPU id) to struct Qdisc set after root qdisc is entered. When the softirq enters it a second time, if the qdisc owner is the same CPU, the packet is dropped to break the loop. | |||||
| CVE-2024-26962 | 1 Linux | 1 Linux Kernel | 2024-12-23 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: dm-raid456, md/raid456: fix a deadlock for dm-raid456 while io concurrent with reshape For raid456, if reshape is still in progress, then IO across reshape position will wait for reshape to make progress. However, for dm-raid, in following cases reshape will never make progress hence IO will hang: 1) the array is read-only; 2) MD_RECOVERY_WAIT is set; 3) MD_RECOVERY_FROZEN is set; After commit c467e97f079f ("md/raid6: use valid sector values to determine if an I/O should wait on the reshape") fix the problem that IO across reshape position doesn't wait for reshape, the dm-raid test shell/lvconvert-raid-reshape.sh start to hang: [root@fedora ~]# cat /proc/979/stack [<0>] wait_woken+0x7d/0x90 [<0>] raid5_make_request+0x929/0x1d70 [raid456] [<0>] md_handle_request+0xc2/0x3b0 [md_mod] [<0>] raid_map+0x2c/0x50 [dm_raid] [<0>] __map_bio+0x251/0x380 [dm_mod] [<0>] dm_submit_bio+0x1f0/0x760 [dm_mod] [<0>] __submit_bio+0xc2/0x1c0 [<0>] submit_bio_noacct_nocheck+0x17f/0x450 [<0>] submit_bio_noacct+0x2bc/0x780 [<0>] submit_bio+0x70/0xc0 [<0>] mpage_readahead+0x169/0x1f0 [<0>] blkdev_readahead+0x18/0x30 [<0>] read_pages+0x7c/0x3b0 [<0>] page_cache_ra_unbounded+0x1ab/0x280 [<0>] force_page_cache_ra+0x9e/0x130 [<0>] page_cache_sync_ra+0x3b/0x110 [<0>] filemap_get_pages+0x143/0xa30 [<0>] filemap_read+0xdc/0x4b0 [<0>] blkdev_read_iter+0x75/0x200 [<0>] vfs_read+0x272/0x460 [<0>] ksys_read+0x7a/0x170 [<0>] __x64_sys_read+0x1c/0x30 [<0>] do_syscall_64+0xc6/0x230 [<0>] entry_SYSCALL_64_after_hwframe+0x6c/0x74 This is because reshape can't make progress. For md/raid, the problem doesn't exist because register new sync_thread doesn't rely on the IO to be done any more: 1) If array is read-only, it can switch to read-write by ioctl/sysfs; 2) md/raid never set MD_RECOVERY_WAIT; 3) If MD_RECOVERY_FROZEN is set, mddev_suspend() doesn't hold 'reconfig_mutex', hence it can be cleared and reshape can continue by sysfs api 'sync_action'. However, I'm not sure yet how to avoid the problem in dm-raid yet. This patch on the one hand make sure raid_message() can't change sync_thread() through raid_message() after presuspend(), on the other hand detect the above 3 cases before wait for IO do be done in dm_suspend(), and let dm-raid requeue those IO. | |||||
| CVE-2024-42315 | 1 Linux | 1 Linux Kernel | 2024-12-19 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: exfat: fix potential deadlock on __exfat_get_dentry_set When accessing a file with more entries than ES_MAX_ENTRY_NUM, the bh-array is allocated in __exfat_get_entry_set. The problem is that the bh-array is allocated with GFP_KERNEL. It does not make sense. In the following cases, a deadlock for sbi->s_lock between the two processes may occur. CPU0 CPU1 ---- ---- kswapd balance_pgdat lock(fs_reclaim) exfat_iterate lock(&sbi->s_lock) exfat_readdir exfat_get_uniname_from_ext_entry exfat_get_dentry_set __exfat_get_dentry_set kmalloc_array ... lock(fs_reclaim) ... evict exfat_evict_inode lock(&sbi->s_lock) To fix this, let's allocate bh-array with GFP_NOFS. | |||||
| CVE-2024-53080 | 1 Linux | 1 Linux Kernel | 2024-12-17 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: drm/panthor: Lock XArray when getting entries for the VM Similar to commit cac075706f29 ("drm/panthor: Fix race when converting group handle to group object") we need to use the XArray's internal locking when retrieving a vm pointer from there. v2: Removed part of the patch that was trying to protect fetching the heap pointer from XArray, as that operation is protected by the @pool->lock. | |||||
| CVE-2023-52498 | 1 Linux | 1 Linux Kernel | 2024-12-12 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: PM: sleep: Fix possible deadlocks in core system-wide PM code It is reported that in low-memory situations the system-wide resume core code deadlocks, because async_schedule_dev() executes its argument function synchronously if it cannot allocate memory (and not only in that case) and that function attempts to acquire a mutex that is already held. Executing the argument function synchronously from within dpm_async_fn() may also be problematic for ordering reasons (it may cause a consumer device's resume callback to be invoked before a requisite supplier device's one, for example). Address this by changing the code in question to use async_schedule_dev_nocall() for scheduling the asynchronous execution of device suspend and resume functions and to directly run them synchronously if async_schedule_dev_nocall() returns false. | |||||
| CVE-2023-52493 | 1 Linux | 1 Linux Kernel | 2024-12-12 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: bus: mhi: host: Drop chan lock before queuing buffers Ensure read and write locks for the channel are not taken in succession by dropping the read lock from parse_xfer_event() such that a callback given to client can potentially queue buffers and acquire the write lock in that process. Any queueing of buffers should be done without channel read lock acquired as it can result in multiple locks and a soft lockup. [mani: added fixes tag and cc'ed stable] | |||||
| CVE-2023-52615 | 1 Linux | 1 Linux Kernel | 2024-12-12 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: hwrng: core - Fix page fault dead lock on mmap-ed hwrng There is a dead-lock in the hwrng device read path. This triggers when the user reads from /dev/hwrng into memory also mmap-ed from /dev/hwrng. The resulting page fault triggers a recursive read which then dead-locks. Fix this by using a stack buffer when calling copy_to_user. | |||||
| CVE-2023-52595 | 1 Linux | 1 Linux Kernel | 2024-12-12 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: wifi: rt2x00: restart beacon queue when hardware reset When a hardware reset is triggered, all registers are reset, so all queues are forced to stop in hardware interface. However, mac80211 will not automatically stop the queue. If we don't manually stop the beacon queue, the queue will be deadlocked and unable to start again. This patch fixes the issue where Apple devices cannot connect to the AP after calling ieee80211_restart_hw(). | |||||
| CVE-2023-52516 | 1 Linux | 1 Linux Kernel | 2024-12-11 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: dma-debug: don't call __dma_entry_alloc_check_leak() under free_entries_lock __dma_entry_alloc_check_leak() calls into printk -> serial console output (qcom geni) and grabs port->lock under free_entries_lock spin lock, which is a reverse locking dependency chain as qcom_geni IRQ handler can call into dma-debug code and grab free_entries_lock under port->lock. Move __dma_entry_alloc_check_leak() call out of free_entries_lock scope so that we don't acquire serial console's port->lock under it. Trimmed-down lockdep splat: The existing dependency chain (in reverse order) is: -> #2 (free_entries_lock){-.-.}-{2:2}: _raw_spin_lock_irqsave+0x60/0x80 dma_entry_alloc+0x38/0x110 debug_dma_map_page+0x60/0xf8 dma_map_page_attrs+0x1e0/0x230 dma_map_single_attrs.constprop.0+0x6c/0xc8 geni_se_rx_dma_prep+0x40/0xcc qcom_geni_serial_isr+0x310/0x510 __handle_irq_event_percpu+0x110/0x244 handle_irq_event_percpu+0x20/0x54 handle_irq_event+0x50/0x88 handle_fasteoi_irq+0xa4/0xcc handle_irq_desc+0x28/0x40 generic_handle_domain_irq+0x24/0x30 gic_handle_irq+0xc4/0x148 do_interrupt_handler+0xa4/0xb0 el1_interrupt+0x34/0x64 el1h_64_irq_handler+0x18/0x24 el1h_64_irq+0x64/0x68 arch_local_irq_enable+0x4/0x8 ____do_softirq+0x18/0x24 ... -> #1 (&port_lock_key){-.-.}-{2:2}: _raw_spin_lock_irqsave+0x60/0x80 qcom_geni_serial_console_write+0x184/0x1dc console_flush_all+0x344/0x454 console_unlock+0x94/0xf0 vprintk_emit+0x238/0x24c vprintk_default+0x3c/0x48 vprintk+0xb4/0xbc _printk+0x68/0x90 register_console+0x230/0x38c uart_add_one_port+0x338/0x494 qcom_geni_serial_probe+0x390/0x424 platform_probe+0x70/0xc0 really_probe+0x148/0x280 __driver_probe_device+0xfc/0x114 driver_probe_device+0x44/0x100 __device_attach_driver+0x64/0xdc bus_for_each_drv+0xb0/0xd8 __device_attach+0xe4/0x140 device_initial_probe+0x1c/0x28 bus_probe_device+0x44/0xb0 device_add+0x538/0x668 of_device_add+0x44/0x50 of_platform_device_create_pdata+0x94/0xc8 of_platform_bus_create+0x270/0x304 of_platform_populate+0xac/0xc4 devm_of_platform_populate+0x60/0xac geni_se_probe+0x154/0x160 platform_probe+0x70/0xc0 ... -> #0 (console_owner){-...}-{0:0}: __lock_acquire+0xdf8/0x109c lock_acquire+0x234/0x284 console_flush_all+0x330/0x454 console_unlock+0x94/0xf0 vprintk_emit+0x238/0x24c vprintk_default+0x3c/0x48 vprintk+0xb4/0xbc _printk+0x68/0x90 dma_entry_alloc+0xb4/0x110 debug_dma_map_sg+0xdc/0x2f8 __dma_map_sg_attrs+0xac/0xe4 dma_map_sgtable+0x30/0x4c get_pages+0x1d4/0x1e4 [msm] msm_gem_pin_pages_locked+0x38/0xac [msm] msm_gem_pin_vma_locked+0x58/0x88 [msm] msm_ioctl_gem_submit+0xde4/0x13ac [msm] drm_ioctl_kernel+0xe0/0x15c drm_ioctl+0x2e8/0x3f4 vfs_ioctl+0x30/0x50 ... Chain exists of: console_owner --> &port_lock_key --> free_entries_lock Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(free_entries_lock); lock(&port_lock_key); lock(free_entries_lock); lock(console_owner); *** DEADLOCK *** Call trace: dump_backtrace+0xb4/0xf0 show_stack+0x20/0x30 dump_stack_lvl+0x60/0x84 dump_stack+0x18/0x24 print_circular_bug+0x1cc/0x234 check_noncircular+0x78/0xac __lock_acquire+0xdf8/0x109c lock_acquire+0x234/0x284 console_flush_all+0x330/0x454 consol ---truncated--- | |||||
| CVE-2021-47067 | 1 Linux | 1 Linux Kernel | 2024-12-10 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: soc/tegra: regulators: Fix locking up when voltage-spread is out of range Fix voltage coupler lockup which happens when voltage-spread is out of range due to a bug in the code. The max-spread requirement shall be accounted when CPU regulator doesn't have consumers. This problem is observed on Tegra30 Ouya game console once system-wide DVFS is enabled in a device-tree. | |||||
| CVE-2023-52484 | 1 Linux | 1 Linux Kernel | 2024-12-10 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: iommu/arm-smmu-v3: Fix soft lockup triggered by arm_smmu_mm_invalidate_range When running an SVA case, the following soft lockup is triggered: -------------------------------------------------------------------- watchdog: BUG: soft lockup - CPU#244 stuck for 26s! pstate: 83400009 (Nzcv daif +PAN -UAO +TCO +DIT -SSBS BTYPE=--) pc : arm_smmu_cmdq_issue_cmdlist+0x178/0xa50 lr : arm_smmu_cmdq_issue_cmdlist+0x150/0xa50 sp : ffff8000d83ef290 x29: ffff8000d83ef290 x28: 000000003b9aca00 x27: 0000000000000000 x26: ffff8000d83ef3c0 x25: da86c0812194a0e8 x24: 0000000000000000 x23: 0000000000000040 x22: ffff8000d83ef340 x21: ffff0000c63980c0 x20: 0000000000000001 x19: ffff0000c6398080 x18: 0000000000000000 x17: 0000000000000000 x16: 0000000000000000 x15: ffff3000b4a3bbb0 x14: ffff3000b4a30888 x13: ffff3000b4a3cf60 x12: 0000000000000000 x11: 0000000000000000 x10: 0000000000000000 x9 : ffffc08120e4d6bc x8 : 0000000000000000 x7 : 0000000000000000 x6 : 0000000000048cfa x5 : 0000000000000000 x4 : 0000000000000001 x3 : 000000000000000a x2 : 0000000080000000 x1 : 0000000000000000 x0 : 0000000000000001 Call trace: arm_smmu_cmdq_issue_cmdlist+0x178/0xa50 __arm_smmu_tlb_inv_range+0x118/0x254 arm_smmu_tlb_inv_range_asid+0x6c/0x130 arm_smmu_mm_invalidate_range+0xa0/0xa4 __mmu_notifier_invalidate_range_end+0x88/0x120 unmap_vmas+0x194/0x1e0 unmap_region+0xb4/0x144 do_mas_align_munmap+0x290/0x490 do_mas_munmap+0xbc/0x124 __vm_munmap+0xa8/0x19c __arm64_sys_munmap+0x28/0x50 invoke_syscall+0x78/0x11c el0_svc_common.constprop.0+0x58/0x1c0 do_el0_svc+0x34/0x60 el0_svc+0x2c/0xd4 el0t_64_sync_handler+0x114/0x140 el0t_64_sync+0x1a4/0x1a8 -------------------------------------------------------------------- Note that since 6.6-rc1 the arm_smmu_mm_invalidate_range above is renamed to "arm_smmu_mm_arch_invalidate_secondary_tlbs", yet the problem remains. The commit 06ff87bae8d3 ("arm64: mm: remove unused functions and variable protoypes") fixed a similar lockup on the CPU MMU side. Yet, it can occur to SMMU too, since arm_smmu_mm_arch_invalidate_secondary_tlbs() is called typically next to MMU tlb flush function, e.g. tlb_flush_mmu_tlbonly { tlb_flush { __flush_tlb_range { // check MAX_TLBI_OPS } } mmu_notifier_arch_invalidate_secondary_tlbs { arm_smmu_mm_arch_invalidate_secondary_tlbs { // does not check MAX_TLBI_OPS } } } Clone a CMDQ_MAX_TLBI_OPS from the MAX_TLBI_OPS in tlbflush.h, since in an SVA case SMMU uses the CPU page table, so it makes sense to align with the tlbflush code. Then, replace per-page TLBI commands with a single per-asid TLBI command, if the request size hits this threshold. | |||||
| CVE-2024-53085 | 1 Linux | 1 Linux Kernel | 2024-12-09 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: tpm: Lock TPM chip in tpm_pm_suspend() first Setting TPM_CHIP_FLAG_SUSPENDED in the end of tpm_pm_suspend() can be racy according, as this leaves window for tpm_hwrng_read() to be called while the operation is in progress. The recent bug report gives also evidence of this behaviour. Aadress this by locking the TPM chip before checking any chip->flags both in tpm_pm_suspend() and tpm_hwrng_read(). Move TPM_CHIP_FLAG_SUSPENDED check inside tpm_get_random() so that it will be always checked only when the lock is reserved. | |||||
| CVE-2024-40965 | 1 Linux | 1 Linux Kernel | 2024-12-09 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: i2c: lpi2c: Avoid calling clk_get_rate during transfer Instead of repeatedly calling clk_get_rate for each transfer, lock the clock rate and cache the value. A deadlock has been observed while adding tlv320aic32x4 audio codec to the system. When this clock provider adds its clock, the clk mutex is locked already, it needs to access i2c, which in return needs the mutex for clk_get_rate as well. | |||||
| CVE-2021-47038 | 1 Linux | 1 Linux Kernel | 2024-12-06 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: Bluetooth: avoid deadlock between hci_dev->lock and socket lock Commit eab2404ba798 ("Bluetooth: Add BT_PHY socket option") added a dependency between socket lock and hci_dev->lock that could lead to deadlock. It turns out that hci_conn_get_phy() is not in any way relying on hdev being immutable during the runtime of this function, neither does it even look at any of the members of hdev, and as such there is no need to hold that lock. This fixes the lockdep splat below: ====================================================== WARNING: possible circular locking dependency detected 5.12.0-rc1-00026-g73d464503354 #10 Not tainted ------------------------------------------------------ bluetoothd/1118 is trying to acquire lock: ffff8f078383c078 (&hdev->lock){+.+.}-{3:3}, at: hci_conn_get_phy+0x1c/0x150 [bluetooth] but task is already holding lock: ffff8f07e831d920 (sk_lock-AF_BLUETOOTH-BTPROTO_L2CAP){+.+.}-{0:0}, at: l2cap_sock_getsockopt+0x8b/0x610 which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #3 (sk_lock-AF_BLUETOOTH-BTPROTO_L2CAP){+.+.}-{0:0}: lock_sock_nested+0x72/0xa0 l2cap_sock_ready_cb+0x18/0x70 [bluetooth] l2cap_config_rsp+0x27a/0x520 [bluetooth] l2cap_sig_channel+0x658/0x1330 [bluetooth] l2cap_recv_frame+0x1ba/0x310 [bluetooth] hci_rx_work+0x1cc/0x640 [bluetooth] process_one_work+0x244/0x5f0 worker_thread+0x3c/0x380 kthread+0x13e/0x160 ret_from_fork+0x22/0x30 -> #2 (&chan->lock#2/1){+.+.}-{3:3}: __mutex_lock+0xa3/0xa10 l2cap_chan_connect+0x33a/0x940 [bluetooth] l2cap_sock_connect+0x141/0x2a0 [bluetooth] __sys_connect+0x9b/0xc0 __x64_sys_connect+0x16/0x20 do_syscall_64+0x33/0x80 entry_SYSCALL_64_after_hwframe+0x44/0xae -> #1 (&conn->chan_lock){+.+.}-{3:3}: __mutex_lock+0xa3/0xa10 l2cap_chan_connect+0x322/0x940 [bluetooth] l2cap_sock_connect+0x141/0x2a0 [bluetooth] __sys_connect+0x9b/0xc0 __x64_sys_connect+0x16/0x20 do_syscall_64+0x33/0x80 entry_SYSCALL_64_after_hwframe+0x44/0xae -> #0 (&hdev->lock){+.+.}-{3:3}: __lock_acquire+0x147a/0x1a50 lock_acquire+0x277/0x3d0 __mutex_lock+0xa3/0xa10 hci_conn_get_phy+0x1c/0x150 [bluetooth] l2cap_sock_getsockopt+0x5a9/0x610 [bluetooth] __sys_getsockopt+0xcc/0x200 __x64_sys_getsockopt+0x20/0x30 do_syscall_64+0x33/0x80 entry_SYSCALL_64_after_hwframe+0x44/0xae other info that might help us debug this: Chain exists of: &hdev->lock --> &chan->lock#2/1 --> sk_lock-AF_BLUETOOTH-BTPROTO_L2CAP Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(sk_lock-AF_BLUETOOTH-BTPROTO_L2CAP); lock(&chan->lock#2/1); lock(sk_lock-AF_BLUETOOTH-BTPROTO_L2CAP); lock(&hdev->lock); *** DEADLOCK *** 1 lock held by bluetoothd/1118: #0: ffff8f07e831d920 (sk_lock-AF_BLUETOOTH-BTPROTO_L2CAP){+.+.}-{0:0}, at: l2cap_sock_getsockopt+0x8b/0x610 [bluetooth] stack backtrace: CPU: 3 PID: 1118 Comm: bluetoothd Not tainted 5.12.0-rc1-00026-g73d464503354 #10 Hardware name: LENOVO 20K5S22R00/20K5S22R00, BIOS R0IET38W (1.16 ) 05/31/2017 Call Trace: dump_stack+0x7f/0xa1 check_noncircular+0x105/0x120 ? __lock_acquire+0x147a/0x1a50 __lock_acquire+0x147a/0x1a50 lock_acquire+0x277/0x3d0 ? hci_conn_get_phy+0x1c/0x150 [bluetooth] ? __lock_acquire+0x2e1/0x1a50 ? lock_is_held_type+0xb4/0x120 ? hci_conn_get_phy+0x1c/0x150 [bluetooth] __mutex_lock+0xa3/0xa10 ? hci_conn_get_phy+0x1c/0x150 [bluetooth] ? lock_acquire+0x277/0x3d0 ? mark_held_locks+0x49/0x70 ? mark_held_locks+0x49/0x70 ? hci_conn_get_phy+0x1c/0x150 [bluetooth] hci_conn_get_phy+0x ---truncated--- | |||||
| CVE-2021-47041 | 1 Linux | 1 Linux Kernel | 2024-12-06 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: nvmet-tcp: fix incorrect locking in state_change sk callback We are not changing anything in the TCP connection state so we should not take a write_lock but rather a read lock. This caused a deadlock when running nvmet-tcp and nvme-tcp on the same system, where state_change callbacks on the host and on the controller side have causal relationship and made lockdep report on this with blktests: ================================ WARNING: inconsistent lock state 5.12.0-rc3 #1 Tainted: G I -------------------------------- inconsistent {IN-SOFTIRQ-W} -> {SOFTIRQ-ON-R} usage. nvme/1324 [HC0[0]:SC0[0]:HE1:SE1] takes: ffff888363151000 (clock-AF_INET){++-?}-{2:2}, at: nvme_tcp_state_change+0x21/0x150 [nvme_tcp] {IN-SOFTIRQ-W} state was registered at: __lock_acquire+0x79b/0x18d0 lock_acquire+0x1ca/0x480 _raw_write_lock_bh+0x39/0x80 nvmet_tcp_state_change+0x21/0x170 [nvmet_tcp] tcp_fin+0x2a8/0x780 tcp_data_queue+0xf94/0x1f20 tcp_rcv_established+0x6ba/0x1f00 tcp_v4_do_rcv+0x502/0x760 tcp_v4_rcv+0x257e/0x3430 ip_protocol_deliver_rcu+0x69/0x6a0 ip_local_deliver_finish+0x1e2/0x2f0 ip_local_deliver+0x1a2/0x420 ip_rcv+0x4fb/0x6b0 __netif_receive_skb_one_core+0x162/0x1b0 process_backlog+0x1ff/0x770 __napi_poll.constprop.0+0xa9/0x5c0 net_rx_action+0x7b3/0xb30 __do_softirq+0x1f0/0x940 do_softirq+0xa1/0xd0 __local_bh_enable_ip+0xd8/0x100 ip_finish_output2+0x6b7/0x18a0 __ip_queue_xmit+0x706/0x1aa0 __tcp_transmit_skb+0x2068/0x2e20 tcp_write_xmit+0xc9e/0x2bb0 __tcp_push_pending_frames+0x92/0x310 inet_shutdown+0x158/0x300 __nvme_tcp_stop_queue+0x36/0x270 [nvme_tcp] nvme_tcp_stop_queue+0x87/0xb0 [nvme_tcp] nvme_tcp_teardown_admin_queue+0x69/0xe0 [nvme_tcp] nvme_do_delete_ctrl+0x100/0x10c [nvme_core] nvme_sysfs_delete.cold+0x8/0xd [nvme_core] kernfs_fop_write_iter+0x2c7/0x460 new_sync_write+0x36c/0x610 vfs_write+0x5c0/0x870 ksys_write+0xf9/0x1d0 do_syscall_64+0x33/0x40 entry_SYSCALL_64_after_hwframe+0x44/0xae irq event stamp: 10687 hardirqs last enabled at (10687): [<ffffffff9ec376bd>] _raw_spin_unlock_irqrestore+0x2d/0x40 hardirqs last disabled at (10686): [<ffffffff9ec374d8>] _raw_spin_lock_irqsave+0x68/0x90 softirqs last enabled at (10684): [<ffffffff9f000608>] __do_softirq+0x608/0x940 softirqs last disabled at (10649): [<ffffffff9cdedd31>] do_softirq+0xa1/0xd0 other info that might help us debug this: Possible unsafe locking scenario: CPU0 ---- lock(clock-AF_INET); <Interrupt> lock(clock-AF_INET); *** DEADLOCK *** 5 locks held by nvme/1324: #0: ffff8884a01fe470 (sb_writers#4){.+.+}-{0:0}, at: ksys_write+0xf9/0x1d0 #1: ffff8886e435c090 (&of->mutex){+.+.}-{3:3}, at: kernfs_fop_write_iter+0x216/0x460 #2: ffff888104d90c38 (kn->active#255){++++}-{0:0}, at: kernfs_remove_self+0x22d/0x330 #3: ffff8884634538d0 (&queue->queue_lock){+.+.}-{3:3}, at: nvme_tcp_stop_queue+0x52/0xb0 [nvme_tcp] #4: ffff888363150d30 (sk_lock-AF_INET){+.+.}-{0:0}, at: inet_shutdown+0x59/0x300 stack backtrace: CPU: 26 PID: 1324 Comm: nvme Tainted: G I 5.12.0-rc3 #1 Hardware name: Dell Inc. PowerEdge R640/06NR82, BIOS 2.10.0 11/12/2020 Call Trace: dump_stack+0x93/0xc2 mark_lock_irq.cold+0x2c/0xb3 ? verify_lock_unused+0x390/0x390 ? stack_trace_consume_entry+0x160/0x160 ? lock_downgrade+0x100/0x100 ? save_trace+0x88/0x5e0 ? _raw_spin_unlock_irqrestore+0x2d/0x40 mark_lock+0x530/0x1470 ? mark_lock_irq+0x1d10/0x1d10 ? enqueue_timer+0x660/0x660 mark_usage+0x215/0x2a0 __lock_acquire+0x79b/0x18d0 ? tcp_schedule_loss_probe.part.0+0x38c/0x520 lock_acquire+0x1ca/0x480 ? nvme_tcp_state_change+0x21/0x150 [nvme_tcp] ? rcu_read_unlock+0x40/0x40 ? tcp_mtu_probe+0x1ae0/0x1ae0 ? kmalloc_reserve+0xa0/0xa0 ? sysfs_file_ops+0x170/0x170 _raw_read_lock+0x3d/0xa0 ? nvme_tcp_state_change+0x21/0x150 [nvme_tcp] nvme_tcp_state_change+0x21/0x150 [nvme_tcp] ? sysfs_file_ops ---truncated--- | |||||
| CVE-2021-46987 | 1 Linux | 1 Linux Kernel | 2024-12-06 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: btrfs: fix deadlock when cloning inline extents and using qgroups There are a few exceptional cases where cloning an inline extent needs to copy the inline extent data into a page of the destination inode. When this happens, we end up starting a transaction while having a dirty page for the destination inode and while having the range locked in the destination's inode iotree too. Because when reserving metadata space for a transaction we may need to flush existing delalloc in case there is not enough free space, we have a mechanism in place to prevent a deadlock, which was introduced in commit 3d45f221ce627d ("btrfs: fix deadlock when cloning inline extent and low on free metadata space"). However when using qgroups, a transaction also reserves metadata qgroup space, which can also result in flushing delalloc in case there is not enough available space at the moment. When this happens we deadlock, since flushing delalloc requires locking the file range in the inode's iotree and the range was already locked at the very beginning of the clone operation, before attempting to start the transaction. When this issue happens, stack traces like the following are reported: [72747.556262] task:kworker/u81:9 state:D stack: 0 pid: 225 ppid: 2 flags:0x00004000 [72747.556268] Workqueue: writeback wb_workfn (flush-btrfs-1142) [72747.556271] Call Trace: [72747.556273] __schedule+0x296/0x760 [72747.556277] schedule+0x3c/0xa0 [72747.556279] io_schedule+0x12/0x40 [72747.556284] __lock_page+0x13c/0x280 [72747.556287] ? generic_file_readonly_mmap+0x70/0x70 [72747.556325] extent_write_cache_pages+0x22a/0x440 [btrfs] [72747.556331] ? __set_page_dirty_nobuffers+0xe7/0x160 [72747.556358] ? set_extent_buffer_dirty+0x5e/0x80 [btrfs] [72747.556362] ? update_group_capacity+0x25/0x210 [72747.556366] ? cpumask_next_and+0x1a/0x20 [72747.556391] extent_writepages+0x44/0xa0 [btrfs] [72747.556394] do_writepages+0x41/0xd0 [72747.556398] __writeback_single_inode+0x39/0x2a0 [72747.556403] writeback_sb_inodes+0x1ea/0x440 [72747.556407] __writeback_inodes_wb+0x5f/0xc0 [72747.556410] wb_writeback+0x235/0x2b0 [72747.556414] ? get_nr_inodes+0x35/0x50 [72747.556417] wb_workfn+0x354/0x490 [72747.556420] ? newidle_balance+0x2c5/0x3e0 [72747.556424] process_one_work+0x1aa/0x340 [72747.556426] worker_thread+0x30/0x390 [72747.556429] ? create_worker+0x1a0/0x1a0 [72747.556432] kthread+0x116/0x130 [72747.556435] ? kthread_park+0x80/0x80 [72747.556438] ret_from_fork+0x1f/0x30 [72747.566958] Workqueue: btrfs-flush_delalloc btrfs_work_helper [btrfs] [72747.566961] Call Trace: [72747.566964] __schedule+0x296/0x760 [72747.566968] ? finish_wait+0x80/0x80 [72747.566970] schedule+0x3c/0xa0 [72747.566995] wait_extent_bit.constprop.68+0x13b/0x1c0 [btrfs] [72747.566999] ? finish_wait+0x80/0x80 [72747.567024] lock_extent_bits+0x37/0x90 [btrfs] [72747.567047] btrfs_invalidatepage+0x299/0x2c0 [btrfs] [72747.567051] ? find_get_pages_range_tag+0x2cd/0x380 [72747.567076] __extent_writepage+0x203/0x320 [btrfs] [72747.567102] extent_write_cache_pages+0x2bb/0x440 [btrfs] [72747.567106] ? update_load_avg+0x7e/0x5f0 [72747.567109] ? enqueue_entity+0xf4/0x6f0 [72747.567134] extent_writepages+0x44/0xa0 [btrfs] [72747.567137] ? enqueue_task_fair+0x93/0x6f0 [72747.567140] do_writepages+0x41/0xd0 [72747.567144] __filemap_fdatawrite_range+0xc7/0x100 [72747.567167] btrfs_run_delalloc_work+0x17/0x40 [btrfs] [72747.567195] btrfs_work_helper+0xc2/0x300 [btrfs] [72747.567200] process_one_work+0x1aa/0x340 [72747.567202] worker_thread+0x30/0x390 [72747.567205] ? create_worker+0x1a0/0x1a0 [72747.567208] kthread+0x116/0x130 [72747.567211] ? kthread_park+0x80/0x80 [72747.567214] ret_from_fork+0x1f/0x30 [72747.569686] task:fsstress state:D stack: ---truncated--- | |||||
| CVE-2024-38553 | 1 Linux | 1 Linux Kernel | 2024-12-02 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: net: fec: remove .ndo_poll_controller to avoid deadlocks There is a deadlock issue found in sungem driver, please refer to the commit ac0a230f719b ("eth: sungem: remove .ndo_poll_controller to avoid deadlocks"). The root cause of the issue is that netpoll is in atomic context and disable_irq() is called by .ndo_poll_controller interface of sungem driver, however, disable_irq() might sleep. After analyzing the implementation of fec_poll_controller(), the fec driver should have the same issue. Due to the fec driver uses NAPI for TX completions, the .ndo_poll_controller is unnecessary to be implemented in the fec driver, so fec_poll_controller() can be safely removed. | |||||
| CVE-2024-53047 | 1 Linux | 1 Linux Kernel | 2024-11-27 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: mptcp: init: protect sched with rcu_read_lock Enabling CONFIG_PROVE_RCU_LIST with its dependence CONFIG_RCU_EXPERT creates this splat when an MPTCP socket is created: ============================= WARNING: suspicious RCU usage 6.12.0-rc2+ #11 Not tainted ----------------------------- net/mptcp/sched.c:44 RCU-list traversed in non-reader section!! other info that might help us debug this: rcu_scheduler_active = 2, debug_locks = 1 no locks held by mptcp_connect/176. stack backtrace: CPU: 0 UID: 0 PID: 176 Comm: mptcp_connect Not tainted 6.12.0-rc2+ #11 Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011 Call Trace: <TASK> dump_stack_lvl (lib/dump_stack.c:123) lockdep_rcu_suspicious (kernel/locking/lockdep.c:6822) mptcp_sched_find (net/mptcp/sched.c:44 (discriminator 7)) mptcp_init_sock (net/mptcp/protocol.c:2867 (discriminator 1)) ? sock_init_data_uid (arch/x86/include/asm/atomic.h:28) inet_create.part.0.constprop.0 (net/ipv4/af_inet.c:386) ? __sock_create (include/linux/rcupdate.h:347 (discriminator 1)) __sock_create (net/socket.c:1576) __sys_socket (net/socket.c:1671) ? __pfx___sys_socket (net/socket.c:1712) ? do_user_addr_fault (arch/x86/mm/fault.c:1419 (discriminator 1)) __x64_sys_socket (net/socket.c:1728) do_syscall_64 (arch/x86/entry/common.c:52 (discriminator 1)) entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:130) That's because when the socket is initialised, rcu_read_lock() is not used despite the explicit comment written above the declaration of mptcp_sched_find() in sched.c. Adding the missing lock/unlock avoids the warning. | |||||
| CVE-2024-53086 | 1 Linux | 1 Linux Kernel | 2024-11-27 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: drm/xe: Drop VM dma-resv lock on xe_sync_in_fence_get failure in exec IOCTL Upon failure all locks need to be dropped before returning to the user. (cherry picked from commit 7d1a4258e602ffdce529f56686925034c1b3b095) | |||||