Total
54 CVE
| CVE | Vendors | Products | Updated | CVSS v2 | CVSS v3 |
|---|---|---|---|---|---|
| CVE-2024-56674 | 1 Linux | 1 Linux Kernel | 2025-01-06 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: virtio_net: correct netdev_tx_reset_queue() invocation point When virtnet_close is followed by virtnet_open, some TX completions can possibly remain unconsumed, until they are finally processed during the first NAPI poll after the netdev_tx_reset_queue(), resulting in a crash [1]. Commit b96ed2c97c79 ("virtio_net: move netdev_tx_reset_queue() call before RX napi enable") was not sufficient to eliminate all BQL crash cases for virtio-net. This issue can be reproduced with the latest net-next master by running: `while :; do ip l set DEV down; ip l set DEV up; done` under heavy network TX load from inside the machine. netdev_tx_reset_queue() can actually be dropped from virtnet_open path; the device is not stopped in any case. For BQL core part, it's just like traffic nearly ceases to exist for some period. For stall detector added to BQL, even if virtnet_close could somehow lead to some TX completions delayed for long, followed by virtnet_open, we can just take it as stall as mentioned in commit 6025b9135f7a ("net: dqs: add NIC stall detector based on BQL"). Note also that users can still reset stall_max via sysfs. So, drop netdev_tx_reset_queue() from virtnet_enable_queue_pair(). This eliminates the BQL crashes. As a result, netdev_tx_reset_queue() is now explicitly required in freeze/restore path. This patch adds it to immediately after free_unused_bufs(), following the rule of thumb: netdev_tx_reset_queue() should follow any SKB freeing not followed by netdev_tx_completed_queue(). This seems the most consistent and streamlined approach, and now netdev_tx_reset_queue() runs whenever free_unused_bufs() is done. [1]: ------------[ cut here ]------------ kernel BUG at lib/dynamic_queue_limits.c:99! Oops: invalid opcode: 0000 [#1] PREEMPT SMP NOPTI CPU: 7 UID: 0 PID: 1598 Comm: ip Tainted: G N 6.12.0net-next_main+ #2 Tainted: [N]=TEST Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), \ BIOS rel-1.16.3-0-ga6ed6b701f0a-prebuilt.qemu.org 04/01/2014 RIP: 0010:dql_completed+0x26b/0x290 Code: b7 c2 49 89 e9 44 89 da 89 c6 4c 89 d7 e8 ed 17 47 00 58 65 ff 0d 4d 27 90 7e 0f 85 fd fe ff ff e8 ea 53 8d ff e9 f3 fe ff ff <0f> 0b 01 d2 44 89 d1 29 d1 ba 00 00 00 00 0f 48 ca e9 28 ff ff ff RSP: 0018:ffffc900002b0d08 EFLAGS: 00010297 RAX: 0000000000000000 RBX: ffff888102398c80 RCX: 0000000080190009 RDX: 0000000000000000 RSI: 000000000000006a RDI: 0000000000000000 RBP: ffff888102398c00 R08: 0000000000000000 R09: 0000000000000000 R10: 00000000000000ca R11: 0000000000015681 R12: 0000000000000001 R13: ffffc900002b0d68 R14: ffff88811115e000 R15: ffff8881107aca40 FS: 00007f41ded69500(0000) GS:ffff888667dc0000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000556ccc2dc1a0 CR3: 0000000104fd8003 CR4: 0000000000772ef0 PKRU: 55555554 Call Trace: <IRQ> ? die+0x32/0x80 ? do_trap+0xd9/0x100 ? dql_completed+0x26b/0x290 ? dql_completed+0x26b/0x290 ? do_error_trap+0x6d/0xb0 ? dql_completed+0x26b/0x290 ? exc_invalid_op+0x4c/0x60 ? dql_completed+0x26b/0x290 ? asm_exc_invalid_op+0x16/0x20 ? dql_completed+0x26b/0x290 __free_old_xmit+0xff/0x170 [virtio_net] free_old_xmit+0x54/0xc0 [virtio_net] virtnet_poll+0xf4/0xe30 [virtio_net] ? __update_load_avg_cfs_rq+0x264/0x2d0 ? update_curr+0x35/0x260 ? reweight_entity+0x1be/0x260 __napi_poll.constprop.0+0x28/0x1c0 net_rx_action+0x329/0x420 ? enqueue_hrtimer+0x35/0x90 ? trace_hardirqs_on+0x1d/0x80 ? kvm_sched_clock_read+0xd/0x20 ? sched_clock+0xc/0x30 ? kvm_sched_clock_read+0xd/0x20 ? sched_clock+0xc/0x30 ? sched_clock_cpu+0xd/0x1a0 handle_softirqs+0x138/0x3e0 do_softirq.part.0+0x89/0xc0 </IRQ> <TASK> __local_bh_enable_ip+0xa7/0xb0 virtnet_open+0xc8/0x310 [virtio_net] __dev_open+0xfa/0x1b0 __dev_change_flags+0x1de/0x250 dev_change_flags+0x22/0x60 do_setlink.isra.0+0x2df/0x10b0 ? rtnetlink_rcv_msg+0x34f/0x3f0 ? netlink_rcv_skb+0x54/0x100 ? netlink_unicas ---truncated--- | |||||
| CVE-2024-25619 | 1 Joinmastodon | 1 Mastodon | 2024-12-18 | N/A | 3.1 LOW |
| Mastodon is a free, open-source social network server based on ActivityPub. When an OAuth Application is destroyed, the streaming server wasn't being informed that the Access Tokens had also been destroyed, this could have posed security risks to users by allowing an application to continue listening to streaming after the application had been destroyed. Essentially this comes down to the fact that when Doorkeeper sets up the relationship between Applications and Access Tokens, it uses a `dependent: delete_all` configuration, which means the `after_commit` callback setup on `AccessTokenExtension` didn't actually fire, since `delete_all` doesn't trigger ActiveRecord callbacks. To mitigate, we need to add a `before_destroy` callback to `ApplicationExtension` which announces to streaming that all the Application's Access Tokens are being "killed". Impact should be negligible given the affected application had to be owned by the user. None the less this issue has been addressed in versions 4.2.6, 4.1.14, 4.0.14, and 3.5.18. Users are advised to upgrade. There are no known workaround for this vulnerability. | |||||
| CVE-2023-48220 | 2 Decidim, Scambra | 2 Decidim, Devise Invitable | 2024-12-16 | N/A | 5.7 MEDIUM |
| Decidim is a participatory democracy framework. Starting in version 0.4.rc3 and prior to version 2.0.9 of the `devise_invitable` gem, the invites feature allows users to accept the invitation for an unlimited amount of time through the password reset functionality. This issue creates vulnerable dependencies starting in version 0.0.1.alpha3 and prior to versions 0.26.9, 0.27.5, and 0.28.0 of the `decidim,` `decidim-admin`, and `decidim-system` gems. When using the password reset functionality, the `devise_invitable` gem always accepts the pending invitation if the user has been invited. The only check done is if the user has been invited but the code does not ensure that the pending invitation is still valid as defined by the `invite_for` expiry period. Decidim sets this configuration to `2.weeks` so this configuration should be respected. The bug is in the `devise_invitable` gem and should be fixed there and the dependency should be upgraded in Decidim once the fix becomes available. `devise_invitable` to version `2.0.9` and above fix this issue. Versions 0.26.9, 0.27.5, and 0.28.0 of the `decidim,` `decidim-admin`, and `decidim-system` gems contain this fix. As a workaround, invitations can be cancelled directly from the database. | |||||
| CVE-2024-4693 | 2024-11-21 | N/A | 5.5 MEDIUM | ||
| A flaw was found in the QEMU Virtio PCI Bindings (hw/virtio/virtio-pci.c). An improper release and use of the irqfd for vector 0 during the boot process leads to a guest triggerable crash via vhost_net_stop(). This flaw allows a malicious guest to crash the QEMU process on the host. | |||||
| CVE-2024-27308 | 2024-11-21 | N/A | 7.5 HIGH | ||
| Mio is a Metal I/O library for Rust. When using named pipes on Windows, mio will under some circumstances return invalid tokens that correspond to named pipes that have already been deregistered from the mio registry. The impact of this vulnerability depends on how mio is used. For some applications, invalid tokens may be ignored or cause a warning or a crash. On the other hand, for applications that store pointers in the tokens, this vulnerability may result in a use-after-free. For users of Tokio, this vulnerability is serious and can result in a use-after-free in Tokio. The vulnerability is Windows-specific, and can only happen if you are using named pipes. Other IO resources are not affected. This vulnerability has been fixed in mio v0.8.11. All versions of mio between v0.7.2 and v0.8.10 are vulnerable. Tokio is vulnerable when you are using a vulnerable version of mio AND you are using at least Tokio v1.30.0. Versions of Tokio prior to v1.30.0 will ignore invalid tokens, so they are not vulnerable. Vulnerable libraries that use mio can work around this issue by detecting and ignoring invalid tokens. | |||||
| CVE-2024-23638 | 1 Squid-cache | 1 Squid | 2024-11-21 | N/A | 6.5 MEDIUM |
| Squid is a caching proxy for the Web. Due to an expired pointer reference bug, Squid prior to version 6.6 is vulnerable to a Denial of Service attack against Cache Manager error responses. This problem allows a trusted client to perform Denial of Service when generating error pages for Client Manager reports. Squid older than 5.0.5 have not been tested and should be assumed to be vulnerable. All Squid-5.x up to and including 5.9 are vulnerable. All Squid-6.x up to and including 6.5 are vulnerable. This bug is fixed by Squid version 6.6. In addition, patches addressing this problem for the stable releases can be found in Squid's patch archives. As a workaround, prevent access to Cache Manager using Squid's main access control: `http_access deny manager`. | |||||
| CVE-2024-23332 | 1 Notaryproject | 1 Notation-go | 2024-11-21 | N/A | 4.0 MEDIUM |
| The Notary Project is a set of specifications and tools intended to provide a cross-industry standard for securing software supply chains by using authentic container images and other OCI artifacts. An external actor with control of a compromised container registry can provide outdated versions of OCI artifacts, such as Images. This could lead artifact consumers with relaxed trust policies (such as `permissive` instead of `strict`) to potentially use artifacts with signatures that are no longer valid, making them susceptible to any exploits those artifacts may contain. In Notary Project, an artifact publisher can control the validity period of artifact by specifying signature expiry during the signing process. Using shorter signature validity periods along with processes to periodically resign artifacts, allows artifact producers to ensure that their consumers will only receive up-to-date artifacts. Artifact consumers should correspondingly use a `strict` or equivalent trust policy that enforces signature expiry. Together these steps enable use of up-to-date artifacts and safeguard against rollback attack in the event of registry compromise. The Notary Project offers various signature validation options such as `permissive`, `audit` and `skip` to support various scenarios. These scenarios includes 1) situations demanding urgent workload deployment, necessitating the bypassing of expired or revoked signatures; 2) auditing of artifacts lacking signatures without interrupting workload; and 3) skipping of verification for specific images that might have undergone validation through alternative mechanisms. Additionally, the Notary Project supports revocation to ensure the signature freshness. Artifact publishers can sign with short-lived certificates and revoke older certificates when necessary. This revocation serves as a signal to inform artifact consumers that the corresponding unexpired artifact is no longer approved by the publisher. This enables the artifact publisher to control the validity of the signature independently of their ability to manage artifacts in a compromised registry. | |||||
| CVE-2023-42446 | 1 Powauth | 1 Pow | 2024-11-21 | N/A | 6.5 MEDIUM |
| Pow is a authentication and user management solution for Phoenix and Plug-based apps. Starting in version 1.0.14 and prior to version 1.0.34, use of `Pow.Store.Backend.MnesiaCache` is susceptible to session hijacking as expired keys are not being invalidated correctly on startup. A session may expire when all `Pow.Store.Backend.MnesiaCache` instances have been shut down for a period that is longer than a session's remaining TTL. Version 1.0.34 contains a patch for this issue. As a workaround, expired keys, including all expired sessions, can be manually invalidated. | |||||
| CVE-2023-41094 | 1 Silabs | 1 Emberznet | 2024-11-21 | N/A | 10.0 CRITICAL |
| TouchLink packets processed after timeout or out of range due to Operation on a Resource after Expiration and Missing Release of Resource after Effective Lifetime may allow a device to be added outside of valid TouchLink range or pairing duration This issue affects Ember ZNet 7.1.x from 7.1.3 through 7.1.5; 7.2.x from 7.2.0 through 7.2.3; Version 7.3 and later are unaffected | |||||
| CVE-2023-1902 | 1 Zephyrproject | 1 Zephyr | 2024-11-21 | N/A | 5.9 MEDIUM |
| The bluetooth HCI host layer logic not clearing a global reference to a state pointer after handling connection events may allow a malicious HCI Controller to cause the use of a dangling reference in the host layer, leading to a crash (DoS) or potential RCE on the Host layer. | |||||
| CVE-2023-1901 | 1 Zephyrproject | 1 Zephyr | 2024-11-21 | N/A | 5.9 MEDIUM |
| The bluetooth HCI host layer logic not clearing a global reference to a semaphore after synchronously sending HCI commands may allow a malicious HCI Controller to cause the use of a dangling reference in the host layer, leading to a crash (DoS) or potential RCE on the Host layer. | |||||
| CVE-2022-42838 | 1 Apple | 1 Macos | 2024-11-21 | N/A | 3.3 LOW |
| An issue with app access to camera data was addressed with improved logic. This issue is fixed in macOS Ventura 13. A camera extension may be able to continue receiving video after the app which activated was closed. | |||||
| CVE-2022-2447 | 2 Openstack, Redhat | 5 Keystone, Openstack, Openstack Platform and 2 more | 2024-11-21 | N/A | 6.6 MEDIUM |
| A flaw was found in Keystone. There is a time lag (up to one hour in a default configuration) between when security policy says a token should be revoked from when it is actually revoked. This could allow a remote administrator to secretly maintain access for longer than expected. | |||||
| CVE-2022-22332 | 1 Ibm | 1 Partner Engagement Manager | 2024-11-21 | 5.0 MEDIUM | 7.5 HIGH |
| IBM Sterling Partner Engagement Manager 6.2.0 could allow an attacker to impersonate another user due to missing revocation mechanism for the JWT token. IBM X-Force ID: 219131. | |||||
| CVE-2022-22197 | 1 Juniper | 2 Junos, Junos Os Evolved | 2024-11-21 | 4.3 MEDIUM | 7.5 HIGH |
| An Operation on a Resource after Expiration or Release vulnerability in the Routing Protocol Daemon (RPD) of Juniper Networks Junos OS and Junos OS Evolved allows an unauthenticated network-based attacker with an established BGP session to cause a Denial of Service (DoS). This issue occurs when proxy-generate route-target filtering is enabled, and certain proxy-route add and delete events are happening. This issue affects: Juniper Networks Junos OS All versions prior to 17.3R3-S11; 17.4 versions prior to 17.4R2-S13, 17.4R3-S4; 18.3 versions prior to 18.3R3-S4; 18.4 versions prior to 18.4R1-S8, 18.4R2-S8, 18.4R3-S6; 19.1 versions prior to 19.1R3-S4; 19.2 versions prior to 19.2R1-S6, 19.2R3-S2; 19.3 versions prior to 19.3R2-S6, 19.3R3-S1; 19.4 versions prior to 19.4R1-S4, 19.4R2-S4, 19.4R3; 20.1 versions prior to 20.1R2; 20.2 versions prior to 20.2R2; 20.3 versions prior to 20.3R1-S2, 20.3R2. Juniper Networks Junos OS Evolved All versions prior to 20.1R3-EVO; 20.2 versions prior to 20.2R3-EVO; 20.3 versions prior to 20.3R2-EVO. | |||||
| CVE-2021-37204 | 1 Siemens | 95 Simatic Drive Controller Cpu 1504d Tf, Simatic Drive Controller Cpu 1504d Tf Firmware, Simatic Drive Controller Cpu 1507d Tf and 92 more | 2024-11-21 | 7.1 HIGH | 7.5 HIGH |
| A vulnerability has been identified in SIMATIC Drive Controller family (All versions < V2.9.2), SIMATIC Drive Controller family (All versions >= V2.9.2 < V2.9.4), SIMATIC ET 200SP Open Controller CPU 1515SP PC (incl. SIPLUS variants) (All versions), SIMATIC ET 200SP Open Controller CPU 1515SP PC2 (incl. SIPLUS variants) (All versions < V21.9), SIMATIC ET 200SP Open Controller CPU 1515SP PC2 (incl. SIPLUS variants) (All versions >= V21.9 < V21.9.4), SIMATIC ET 200SP Open Controller CPU 1515SP PC2 Ready4Linux (All versions), SIMATIC S7-1200 CPU family (incl. SIPLUS variants) (All versions < V4.5.0), SIMATIC S7-1200 CPU family (incl. SIPLUS variants) (All versions >= V4.5.0 < V4.5.2), SIMATIC S7-1500 CPU family (incl. related ET200 CPUs and SIPLUS variants) (All versions < V2.9.2), SIMATIC S7-1500 CPU family (incl. related ET200 CPUs and SIPLUS variants) (All versions >= V2.9.2 < V2.9.4), SIMATIC S7-1500 Software Controller (All versions < V21.9), SIMATIC S7-1500 Software Controller (All versions >= V21.9 < V21.9.4), SIMATIC S7-PLCSIM Advanced (All versions < V4.0), SIMATIC S7-PLCSIM Advanced (All versions >= V4.0 < V4.0 SP1), SIPLUS TIM 1531 IRC (All versions < V2.3.6), TIM 1531 IRC (All versions < V2.3.6). An unauthenticated attacker could cause a denial-of-service condition in a PLC when sending specially prepared packet over port 102/tcp. A restart of the affected device is needed to restore normal operations. | |||||
| CVE-2021-37185 | 1 Siemens | 95 Simatic Drive Controller Cpu 1504d Tf, Simatic Drive Controller Cpu 1504d Tf Firmware, Simatic Drive Controller Cpu 1507d Tf and 92 more | 2024-11-21 | 7.1 HIGH | 7.5 HIGH |
| A vulnerability has been identified in SIMATIC Drive Controller family (All versions >= V2.9.2 < V2.9.4), SIMATIC ET 200SP Open Controller CPU 1515SP PC2 (incl. SIPLUS variants) (All versions >= V21.9 < V21.9.4), SIMATIC S7-1200 CPU family (incl. SIPLUS variants) (All versions >= V4.5.0 < V4.5.2), SIMATIC S7-1500 CPU family (incl. related ET200 CPUs and SIPLUS variants) (All versions >= V2.9.2 < V2.9.4), SIMATIC S7-1500 Software Controller (All versions >= V21.9 < V21.9.4), SIMATIC S7-PLCSIM Advanced (All versions >= V4.0 < V4.0 SP1), SIPLUS TIM 1531 IRC (All versions < V2.3.6), TIM 1531 IRC (All versions < V2.3.6). An unauthenticated attacker could cause a denial-of-service condition in a PLC when sending specially prepared packets over port 102/tcp. A restart of the affected device is needed to restore normal operations. | |||||
| CVE-2021-33020 | 1 Philips | 4 Myvue, Speech, Vue Motion and 1 more | 2024-11-21 | 5.0 MEDIUM | 8.2 HIGH |
| Philips Vue PACS versions 12.2.x.x and prior uses a cryptographic key or password past its expiration date, which diminishes its safety significantly by increasing the timing window for cracking attacks against that key. | |||||
| CVE-2021-23995 | 1 Mozilla | 3 Firefox, Firefox Esr, Thunderbird | 2024-11-21 | 5.1 MEDIUM | 8.8 HIGH |
| When Responsive Design Mode was enabled, it used references to objects that were previously freed. We presume that with enough effort this could have been exploited to run arbitrary code. This vulnerability affects Firefox ESR < 78.10, Thunderbird < 78.10, and Firefox < 88. | |||||
| CVE-2020-25221 | 2 Linux, Netapp | 6 Linux Kernel, Cloud Backup, Hci Compute Node and 3 more | 2024-11-21 | 7.2 HIGH | 7.8 HIGH |
| get_gate_page in mm/gup.c in the Linux kernel 5.7.x and 5.8.x before 5.8.7 allows privilege escalation because of incorrect reference counting (caused by gate page mishandling) of the struct page that backs the vsyscall page. The result is a refcount underflow. This can be triggered by any 64-bit process that can use ptrace() or process_vm_readv(), aka CID-9fa2dd946743. | |||||