Filtered by vendor Linux
Subscribe
Total
10391 CVE
| CVE | Vendors | Products | Updated | CVSS v2 | CVSS v3 |
|---|---|---|---|---|---|
| CVE-2024-27405 | 2 Debian, Linux | 2 Debian Linux, Linux Kernel | 2025-04-08 | N/A | 7.5 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: usb: gadget: ncm: Avoid dropping datagrams of properly parsed NTBs It is observed sometimes when tethering is used over NCM with Windows 11 as host, at some instances, the gadget_giveback has one byte appended at the end of a proper NTB. When the NTB is parsed, unwrap call looks for any leftover bytes in SKB provided by u_ether and if there are any pending bytes, it treats them as a separate NTB and parses it. But in case the second NTB (as per unwrap call) is faulty/corrupt, all the datagrams that were parsed properly in the first NTB and saved in rx_list are dropped. Adding a few custom traces showed the following: [002] d..1 7828.532866: dwc3_gadget_giveback: ep1out: req 000000003868811a length 1025/16384 zsI ==> 0 [002] d..1 7828.532867: ncm_unwrap_ntb: K: ncm_unwrap_ntb toprocess: 1025 [002] d..1 7828.532867: ncm_unwrap_ntb: K: ncm_unwrap_ntb nth: 1751999342 [002] d..1 7828.532868: ncm_unwrap_ntb: K: ncm_unwrap_ntb seq: 0xce67 [002] d..1 7828.532868: ncm_unwrap_ntb: K: ncm_unwrap_ntb blk_len: 0x400 [002] d..1 7828.532868: ncm_unwrap_ntb: K: ncm_unwrap_ntb ndp_len: 0x10 [002] d..1 7828.532869: ncm_unwrap_ntb: K: Parsed NTB with 1 frames In this case, the giveback is of 1025 bytes and block length is 1024. The rest 1 byte (which is 0x00) won't be parsed resulting in drop of all datagrams in rx_list. Same is case with packets of size 2048: [002] d..1 7828.557948: dwc3_gadget_giveback: ep1out: req 0000000011dfd96e length 2049/16384 zsI ==> 0 [002] d..1 7828.557949: ncm_unwrap_ntb: K: ncm_unwrap_ntb nth: 1751999342 [002] d..1 7828.557950: ncm_unwrap_ntb: K: ncm_unwrap_ntb blk_len: 0x800 Lecroy shows one byte coming in extra confirming that the byte is coming in from PC: Transfer 2959 - Bytes Transferred(1025) Timestamp((18.524 843 590) - Transaction 8391 - Data(1025 bytes) Timestamp(18.524 843 590) --- Packet 4063861 Data(1024 bytes) Duration(2.117us) Idle(14.700ns) Timestamp(18.524 843 590) --- Packet 4063863 Data(1 byte) Duration(66.160ns) Time(282.000ns) Timestamp(18.524 845 722) According to Windows driver, no ZLP is needed if wBlockLength is non-zero, because the non-zero wBlockLength has already told the function side the size of transfer to be expected. However, there are in-market NCM devices that rely on ZLP as long as the wBlockLength is multiple of wMaxPacketSize. To deal with such devices, it pads an extra 0 at end so the transfer is no longer multiple of wMaxPacketSize. | |||||
| CVE-2024-27407 | 1 Linux | 1 Linux Kernel | 2025-04-08 | N/A | 8.4 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: fs/ntfs3: Fixed overflow check in mi_enum_attr() | |||||
| CVE-2022-48696 | 1 Linux | 1 Linux Kernel | 2025-04-08 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: regmap: spi: Reserve space for register address/padding Currently the max_raw_read and max_raw_write limits in regmap_spi struct do not take into account the additional size of the transmitted register address and padding. This may result in exceeding the maximum permitted SPI message size, which could cause undefined behaviour, e.g. data corruption. Fix regmap_get_spi_bus() to properly adjust the above mentioned limits by reserving space for the register address/padding as set in the regmap configuration. | |||||
| CVE-2025-21893 | 1 Linux | 1 Linux Kernel | 2025-04-08 | N/A | 7.8 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: keys: Fix UAF in key_put() Once a key's reference count has been reduced to 0, the garbage collector thread may destroy it at any time and so key_put() is not allowed to touch the key after that point. The most key_put() is normally allowed to do is to touch key_gc_work as that's a static global variable. However, in an effort to speed up the reclamation of quota, this is now done in key_put() once the key's usage is reduced to 0 - but now the code is looking at the key after the deadline, which is forbidden. Fix this by using a flag to indicate that a key can be gc'd now rather than looking at the key's refcount in the garbage collector. | |||||
| CVE-2022-48697 | 1 Linux | 1 Linux Kernel | 2025-04-08 | N/A | 5.3 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: nvmet: fix a use-after-free Fix the following use-after-free complaint triggered by blktests nvme/004: BUG: KASAN: user-memory-access in blk_mq_complete_request_remote+0xac/0x350 Read of size 4 at addr 0000607bd1835943 by task kworker/13:1/460 Workqueue: nvmet-wq nvme_loop_execute_work [nvme_loop] Call Trace: show_stack+0x52/0x58 dump_stack_lvl+0x49/0x5e print_report.cold+0x36/0x1e2 kasan_report+0xb9/0xf0 __asan_load4+0x6b/0x80 blk_mq_complete_request_remote+0xac/0x350 nvme_loop_queue_response+0x1df/0x275 [nvme_loop] __nvmet_req_complete+0x132/0x4f0 [nvmet] nvmet_req_complete+0x15/0x40 [nvmet] nvmet_execute_io_connect+0x18a/0x1f0 [nvmet] nvme_loop_execute_work+0x20/0x30 [nvme_loop] process_one_work+0x56e/0xa70 worker_thread+0x2d1/0x640 kthread+0x183/0x1c0 ret_from_fork+0x1f/0x30 | |||||
| CVE-2022-48698 | 1 Linux | 1 Linux Kernel | 2025-04-08 | N/A | 5.3 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: fix memory leak when using debugfs_lookup() When calling debugfs_lookup() the result must have dput() called on it, otherwise the memory will leak over time. Fix this up by properly calling dput(). | |||||
| CVE-2024-26685 | 2 Debian, Linux | 2 Debian Linux, Linux Kernel | 2025-04-08 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: nilfs2: fix potential bug in end_buffer_async_write According to a syzbot report, end_buffer_async_write(), which handles the completion of block device writes, may detect abnormal condition of the buffer async_write flag and cause a BUG_ON failure when using nilfs2. Nilfs2 itself does not use end_buffer_async_write(). But, the async_write flag is now used as a marker by commit 7f42ec394156 ("nilfs2: fix issue with race condition of competition between segments for dirty blocks") as a means of resolving double list insertion of dirty blocks in nilfs_lookup_dirty_data_buffers() and nilfs_lookup_node_buffers() and the resulting crash. This modification is safe as long as it is used for file data and b-tree node blocks where the page caches are independent. However, it was irrelevant and redundant to also introduce async_write for segment summary and super root blocks that share buffers with the backing device. This led to the possibility that the BUG_ON check in end_buffer_async_write would fail as described above, if independent writebacks of the backing device occurred in parallel. The use of async_write for segment summary buffers has already been removed in a previous change. Fix this issue by removing the manipulation of the async_write flag for the remaining super root block buffer. | |||||
| CVE-2024-26690 | 1 Linux | 1 Linux Kernel | 2025-04-08 | N/A | 6.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: net: stmmac: protect updates of 64-bit statistics counters As explained by a comment in <linux/u64_stats_sync.h>, write side of struct u64_stats_sync must ensure mutual exclusion, or one seqcount update could be lost on 32-bit platforms, thus blocking readers forever. Such lockups have been observed in real world after stmmac_xmit() on one CPU raced with stmmac_napi_poll_tx() on another CPU. To fix the issue without introducing a new lock, split the statics into three parts: 1. fields updated only under the tx queue lock, 2. fields updated only during NAPI poll, 3. fields updated only from interrupt context, Updates to fields in the first two groups are already serialized through other locks. It is sufficient to split the existing struct u64_stats_sync so that each group has its own. Note that tx_set_ic_bit is updated from both contexts. Split this counter so that each context gets its own, and calculate their sum to get the total value in stmmac_get_ethtool_stats(). For the third group, multiple interrupts may be processed by different CPUs at the same time, but interrupts on the same CPU will not nest. Move fields from this group to a newly created per-cpu struct stmmac_pcpu_stats. | |||||
| CVE-2024-26702 | 2 Debian, Linux | 2 Debian Linux, Linux Kernel | 2025-04-08 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: iio: magnetometer: rm3100: add boundary check for the value read from RM3100_REG_TMRC Recently, we encounter kernel crash in function rm3100_common_probe caused by out of bound access of array rm3100_samp_rates (because of underlying hardware failures). Add boundary check to prevent out of bound access. | |||||
| CVE-2024-26708 | 1 Linux | 1 Linux Kernel | 2025-04-08 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: mptcp: really cope with fastopen race Fastopen and PM-trigger subflow shutdown can race, as reported by syzkaller. In my first attempt to close such race, I missed the fact that the subflow status can change again before the subflow_state_change callback is invoked. Address the issue additionally copying with all the states directly reachable from TCP_FIN_WAIT1. | |||||
| CVE-2024-26712 | 2 Debian, Linux | 2 Debian Linux, Linux Kernel | 2025-04-08 | N/A | 4.4 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: powerpc/kasan: Fix addr error caused by page alignment In kasan_init_region, when k_start is not page aligned, at the begin of for loop, k_cur = k_start & PAGE_MASK is less than k_start, and then `va = block + k_cur - k_start` is less than block, the addr va is invalid, because the memory address space from va to block is not alloced by memblock_alloc, which will not be reserved by memblock_reserve later, it will be used by other places. As a result, memory overwriting occurs. for example: int __init __weak kasan_init_region(void *start, size_t size) { [...] /* if say block(dcd97000) k_start(feef7400) k_end(feeff3fe) */ block = memblock_alloc(k_end - k_start, PAGE_SIZE); [...] for (k_cur = k_start & PAGE_MASK; k_cur < k_end; k_cur += PAGE_SIZE) { /* at the begin of for loop * block(dcd97000) va(dcd96c00) k_cur(feef7000) k_start(feef7400) * va(dcd96c00) is less than block(dcd97000), va is invalid */ void *va = block + k_cur - k_start; [...] } [...] } Therefore, page alignment is performed on k_start before memblock_alloc() to ensure the validity of the VA address. | |||||
| CVE-2023-52617 | 2 Debian, Linux | 2 Debian Linux, Linux Kernel | 2025-04-08 | N/A | 4.4 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: PCI: switchtec: Fix stdev_release() crash after surprise hot remove A PCI device hot removal may occur while stdev->cdev is held open. The call to stdev_release() then happens during close or exit, at a point way past switchtec_pci_remove(). Otherwise the last ref would vanish with the trailing put_device(), just before return. At that later point in time, the devm cleanup has already removed the stdev->mmio_mrpc mapping. Also, the stdev->pdev reference was not a counted one. Therefore, in DMA mode, the iowrite32() in stdev_release() will cause a fatal page fault, and the subsequent dma_free_coherent(), if reached, would pass a stale &stdev->pdev->dev pointer. Fix by moving MRPC DMA shutdown into switchtec_pci_remove(), after stdev_kill(). Counting the stdev->pdev ref is now optional, but may prevent future accidents. Reproducible via the script at https://lore.kernel.org/r/20231113212150.96410-1-dns@arista.com | |||||
| CVE-2023-52613 | 1 Linux | 1 Linux Kernel | 2025-04-08 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: drivers/thermal/loongson2_thermal: Fix incorrect PTR_ERR() judgment PTR_ERR() returns -ENODEV when thermal-zones are undefined, and we need -ENODEV as the right value for comparison. Otherwise, tz->type is NULL when thermal-zones is undefined, resulting in the following error: [ 12.290030] CPU 1 Unable to handle kernel paging request at virtual address fffffffffffffff1, era == 900000000355f410, ra == 90000000031579b8 [ 12.302877] Oops[#1]: [ 12.305190] CPU: 1 PID: 181 Comm: systemd-udevd Not tainted 6.6.0-rc7+ #5385 [ 12.312304] pc 900000000355f410 ra 90000000031579b8 tp 90000001069e8000 sp 90000001069eba10 [ 12.320739] a0 0000000000000000 a1 fffffffffffffff1 a2 0000000000000014 a3 0000000000000001 [ 12.329173] a4 90000001069eb990 a5 0000000000000001 a6 0000000000001001 a7 900000010003431c [ 12.337606] t0 fffffffffffffff1 t1 54567fd5da9b4fd4 t2 900000010614ec40 t3 00000000000dc901 [ 12.346041] t4 0000000000000000 t5 0000000000000004 t6 900000010614ee20 t7 900000000d00b790 [ 12.354472] t8 00000000000dc901 u0 54567fd5da9b4fd4 s9 900000000402ae10 s0 900000010614ec40 [ 12.362916] s1 90000000039fced0 s2 ffffffffffffffed s3 ffffffffffffffed s4 9000000003acc000 [ 12.362931] s5 0000000000000004 s6 fffffffffffff000 s7 0000000000000490 s8 90000001028b2ec8 [ 12.362938] ra: 90000000031579b8 thermal_add_hwmon_sysfs+0x258/0x300 [ 12.386411] ERA: 900000000355f410 strscpy+0xf0/0x160 [ 12.391626] CRMD: 000000b0 (PLV0 -IE -DA +PG DACF=CC DACM=CC -WE) [ 12.397898] PRMD: 00000004 (PPLV0 +PIE -PWE) [ 12.403678] EUEN: 00000000 (-FPE -SXE -ASXE -BTE) [ 12.409859] ECFG: 00071c1c (LIE=2-4,10-12 VS=7) [ 12.415882] ESTAT: 00010000 [PIL] (IS= ECode=1 EsubCode=0) [ 12.415907] BADV: fffffffffffffff1 [ 12.415911] PRID: 0014a000 (Loongson-64bit, Loongson-2K1000) [ 12.415917] Modules linked in: loongson2_thermal(+) vfat fat uio_pdrv_genirq uio fuse zram zsmalloc [ 12.415950] Process systemd-udevd (pid: 181, threadinfo=00000000358b9718, task=00000000ace72fe3) [ 12.415961] Stack : 0000000000000dc0 54567fd5da9b4fd4 900000000402ae10 9000000002df9358 [ 12.415982] ffffffffffffffed 0000000000000004 9000000107a10aa8 90000001002a3410 [ 12.415999] ffffffffffffffed ffffffffffffffed 9000000107a11268 9000000003157ab0 [ 12.416016] 9000000107a10aa8 ffffff80020fc0c8 90000001002a3410 ffffffffffffffed [ 12.416032] 0000000000000024 ffffff80020cc1e8 900000000402b2a0 9000000003acc000 [ 12.416048] 90000001002a3410 0000000000000000 ffffff80020f4030 90000001002a3410 [ 12.416065] 0000000000000000 9000000002df6808 90000001002a3410 0000000000000000 [ 12.416081] ffffff80020f4030 0000000000000000 90000001002a3410 9000000002df2ba8 [ 12.416097] 00000000000000b4 90000001002a34f4 90000001002a3410 0000000000000002 [ 12.416114] ffffff80020f4030 fffffffffffffff0 90000001002a3410 9000000002df2f30 [ 12.416131] ... [ 12.416138] Call Trace: [ 12.416142] [<900000000355f410>] strscpy+0xf0/0x160 [ 12.416167] [<90000000031579b8>] thermal_add_hwmon_sysfs+0x258/0x300 [ 12.416183] [<9000000003157ab0>] devm_thermal_add_hwmon_sysfs+0x50/0xe0 [ 12.416200] [<ffffff80020cc1e8>] loongson2_thermal_probe+0x128/0x200 [loongson2_thermal] [ 12.416232] [<9000000002df6808>] platform_probe+0x68/0x140 [ 12.416249] [<9000000002df2ba8>] really_probe+0xc8/0x3c0 [ 12.416269] [<9000000002df2f30>] __driver_probe_device+0x90/0x180 [ 12.416286] [<9000000002df3058>] driver_probe_device+0x38/0x160 [ 12.416302] [<9000000002df33a8>] __driver_attach+0xa8/0x200 [ 12.416314] [<9000000002deffec>] bus_for_each_dev+0x8c/0x120 [ 12.416330] [<9000000002df198c>] bus_add_driver+0x10c/0x2a0 [ 12.416346] [<9000000002df46b4>] driver_register+0x74/0x160 [ 12.416358] [<90000000022201a4>] do_one_initcall+0x84/0x220 [ 12.416372] [<90000000022f3ab8>] do_init_module+0x58/0x2c0 [ ---truncated--- | |||||
| CVE-2022-3628 | 1 Linux | 1 Linux Kernel | 2025-04-08 | N/A | 6.6 MEDIUM |
| A buffer overflow flaw was found in the Linux kernel Broadcom Full MAC Wi-Fi driver. This issue occurs when a user connects to a malicious USB device. This can allow a local user to crash the system or escalate their privileges. | |||||
| CVE-2021-47064 | 1 Linux | 1 Linux Kernel | 2025-04-08 | N/A | 5.3 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: mt76: fix potential DMA mapping leak With buf uninitialized in mt76_dma_tx_queue_skb_raw, its field skip_unmap could potentially inherit a non-zero value from stack garbage. If this happens, it will cause DMA mappings for MCU command frames to not be unmapped after completion | |||||
| CVE-2023-52561 | 1 Linux | 1 Linux Kernel | 2025-04-08 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: arm64: dts: qcom: sdm845-db845c: Mark cont splash memory region as reserved Adding a reserved memory region for the framebuffer memory (the splash memory region set up by the bootloader). It fixes a kernel panic (arm-smmu: Unhandled context fault at this particular memory region) reported on DB845c running v5.10.y. | |||||
| CVE-2023-52566 | 1 Linux | 1 Linux Kernel | 2025-04-08 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: nilfs2: fix potential use after free in nilfs_gccache_submit_read_data() In nilfs_gccache_submit_read_data(), brelse(bh) is called to drop the reference count of bh when the call to nilfs_dat_translate() fails. If the reference count hits 0 and its owner page gets unlocked, bh may be freed. However, bh->b_page is dereferenced to put the page after that, which may result in a use-after-free bug. This patch moves the release operation after unlocking and putting the page. NOTE: The function in question is only called in GC, and in combination with current userland tools, address translation using DAT does not occur in that function, so the code path that causes this issue will not be executed. However, it is possible to run that code path by intentionally modifying the userland GC library or by calling the GC ioctl directly. [konishi.ryusuke@gmail.com: NOTE added to the commit log] | |||||
| CVE-2023-52571 | 1 Linux | 1 Linux Kernel | 2025-04-08 | N/A | 7.1 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: power: supply: rk817: Fix node refcount leak Dan Carpenter reports that the Smatch static checker warning has found that there is another refcount leak in the probe function. While of_node_put() was added in one of the return paths, it should in fact be added for ALL return paths that return an error and at driver removal time. | |||||
| CVE-2023-52576 | 1 Linux | 1 Linux Kernel | 2025-04-08 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: x86/mm, kexec, ima: Use memblock_free_late() from ima_free_kexec_buffer() The code calling ima_free_kexec_buffer() runs long after the memblock allocator has already been torn down, potentially resulting in a use after free in memblock_isolate_range(). With KASAN or KFENCE, this use after free will result in a BUG from the idle task, and a subsequent kernel panic. Switch ima_free_kexec_buffer() over to memblock_free_late() to avoid that bug. | |||||
| CVE-2021-47094 | 1 Linux | 1 Linux Kernel | 2025-04-08 | N/A | 7.1 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: KVM: x86/mmu: Don't advance iterator after restart due to yielding After dropping mmu_lock in the TDP MMU, restart the iterator during tdp_iter_next() and do not advance the iterator. Advancing the iterator results in skipping the top-level SPTE and all its children, which is fatal if any of the skipped SPTEs were not visited before yielding. When zapping all SPTEs, i.e. when min_level == root_level, restarting the iter and then invoking tdp_iter_next() is always fatal if the current gfn has as a valid SPTE, as advancing the iterator results in try_step_side() skipping the current gfn, which wasn't visited before yielding. Sprinkle WARNs on iter->yielded being true in various helpers that are often used in conjunction with yielding, and tag the helper with __must_check to reduce the probabily of improper usage. Failing to zap a top-level SPTE manifests in one of two ways. If a valid SPTE is skipped by both kvm_tdp_mmu_zap_all() and kvm_tdp_mmu_put_root(), the shadow page will be leaked and KVM will WARN accordingly. WARNING: CPU: 1 PID: 3509 at arch/x86/kvm/mmu/tdp_mmu.c:46 [kvm] RIP: 0010:kvm_mmu_uninit_tdp_mmu+0x3e/0x50 [kvm] Call Trace: <TASK> kvm_arch_destroy_vm+0x130/0x1b0 [kvm] kvm_destroy_vm+0x162/0x2a0 [kvm] kvm_vcpu_release+0x34/0x60 [kvm] __fput+0x82/0x240 task_work_run+0x5c/0x90 do_exit+0x364/0xa10 ? futex_unqueue+0x38/0x60 do_group_exit+0x33/0xa0 get_signal+0x155/0x850 arch_do_signal_or_restart+0xed/0x750 exit_to_user_mode_prepare+0xc5/0x120 syscall_exit_to_user_mode+0x1d/0x40 do_syscall_64+0x48/0xc0 entry_SYSCALL_64_after_hwframe+0x44/0xae If kvm_tdp_mmu_zap_all() skips a gfn/SPTE but that SPTE is then zapped by kvm_tdp_mmu_put_root(), KVM triggers a use-after-free in the form of marking a struct page as dirty/accessed after it has been put back on the free list. This directly triggers a WARN due to encountering a page with page_count() == 0, but it can also lead to data corruption and additional errors in the kernel. WARNING: CPU: 7 PID: 1995658 at arch/x86/kvm/../../../virt/kvm/kvm_main.c:171 RIP: 0010:kvm_is_zone_device_pfn.part.0+0x9e/0xd0 [kvm] Call Trace: <TASK> kvm_set_pfn_dirty+0x120/0x1d0 [kvm] __handle_changed_spte+0x92e/0xca0 [kvm] __handle_changed_spte+0x63c/0xca0 [kvm] __handle_changed_spte+0x63c/0xca0 [kvm] __handle_changed_spte+0x63c/0xca0 [kvm] zap_gfn_range+0x549/0x620 [kvm] kvm_tdp_mmu_put_root+0x1b6/0x270 [kvm] mmu_free_root_page+0x219/0x2c0 [kvm] kvm_mmu_free_roots+0x1b4/0x4e0 [kvm] kvm_mmu_unload+0x1c/0xa0 [kvm] kvm_arch_destroy_vm+0x1f2/0x5c0 [kvm] kvm_put_kvm+0x3b1/0x8b0 [kvm] kvm_vcpu_release+0x4e/0x70 [kvm] __fput+0x1f7/0x8c0 task_work_run+0xf8/0x1a0 do_exit+0x97b/0x2230 do_group_exit+0xda/0x2a0 get_signal+0x3be/0x1e50 arch_do_signal_or_restart+0x244/0x17f0 exit_to_user_mode_prepare+0xcb/0x120 syscall_exit_to_user_mode+0x1d/0x40 do_syscall_64+0x4d/0x90 entry_SYSCALL_64_after_hwframe+0x44/0xae Note, the underlying bug existed even before commit 1af4a96025b3 ("KVM: x86/mmu: Yield in TDU MMU iter even if no SPTES changed") moved calls to tdp_mmu_iter_cond_resched() to the beginning of loops, as KVM could still incorrectly advance past a top-level entry when yielding on a lower-level entry. But with respect to leaking shadow pages, the bug was introduced by yielding before processing the current gfn. Alternatively, tdp_mmu_iter_cond_resched() could simply fall through, or callers could jump to their "retry" label. The downside of that approach is that tdp_mmu_iter_cond_resched() _must_ be called before anything else in the loop, and there's no easy way to enfornce that requirement. Ideally, KVM would handling the cond_resched() fully within the iterator macro (the code is actually quite clean) and avoid this entire class of bugs, but that is extremely difficult do wh ---truncated--- | |||||