Filtered by vendor Linux
Subscribe
Total
10391 CVE
| CVE | Vendors | Products | Updated | CVSS v2 | CVSS v3 |
|---|---|---|---|---|---|
| CVE-2024-50179 | 1 Linux | 1 Linux Kernel | 2024-11-29 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: ceph: remove the incorrect Fw reference check when dirtying pages When doing the direct-io reads it will also try to mark pages dirty, but for the read path it won't hold the Fw caps and there is case will it get the Fw reference. | |||||
| CVE-2024-50197 | 1 Linux | 1 Linux Kernel | 2024-11-29 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: pinctrl: intel: platform: fix error path in device_for_each_child_node() The device_for_each_child_node() loop requires calls to fwnode_handle_put() upon early returns to decrement the refcount of the child node and avoid leaking memory if that error path is triggered. There is one early returns within that loop in intel_platform_pinctrl_prepare_community(), but fwnode_handle_put() is missing. Instead of adding the missing call, the scoped version of the loop can be used to simplify the code and avoid mistakes in the future if new early returns are added, as the child node is only used for parsing, and it is never assigned. | |||||
| CVE-2024-50198 | 1 Linux | 1 Linux Kernel | 2024-11-29 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: iio: light: veml6030: fix IIO device retrieval from embedded device The dev pointer that is received as an argument in the in_illuminance_period_available_show function references the device embedded in the IIO device, not in the i2c client. dev_to_iio_dev() must be used to accessthe right data. The current implementation leads to a segmentation fault on every attempt to read the attribute because indio_dev gets a NULL assignment. This bug has been present since the first appearance of the driver, apparently since the last version (V6) before getting applied. A constant attribute was used until then, and the last modifications might have not been tested again. | |||||
| CVE-2024-50196 | 1 Linux | 1 Linux Kernel | 2024-11-29 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: pinctrl: ocelot: fix system hang on level based interrupts The current implementation only calls chained_irq_enter() and chained_irq_exit() if it detects pending interrupts. ``` for (i = 0; i < info->stride; i++) { uregmap_read(info->map, id_reg + 4 * i, ®); if (!reg) continue; chained_irq_enter(parent_chip, desc); ``` However, in case of GPIO pin configured in level mode and the parent controller configured in edge mode, GPIO interrupt might be lowered by the hardware. In the result, if the interrupt is short enough, the parent interrupt is still pending while the GPIO interrupt is cleared; chained_irq_enter() never gets called and the system hangs trying to service the parent interrupt. Moving chained_irq_enter() and chained_irq_exit() outside the for loop ensures that they are called even when GPIO interrupt is lowered by the hardware. The similar code with chained_irq_enter() / chained_irq_exit() functions wrapping interrupt checking loop may be found in many other drivers: ``` grep -r -A 10 chained_irq_enter drivers/pinctrl ``` | |||||
| CVE-2024-50195 | 1 Linux | 1 Linux Kernel | 2024-11-29 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: posix-clock: Fix missing timespec64 check in pc_clock_settime() As Andrew pointed out, it will make sense that the PTP core checked timespec64 struct's tv_sec and tv_nsec range before calling ptp->info->settime64(). As the man manual of clock_settime() said, if tp.tv_sec is negative or tp.tv_nsec is outside the range [0..999,999,999], it should return EINVAL, which include dynamic clocks which handles PTP clock, and the condition is consistent with timespec64_valid(). As Thomas suggested, timespec64_valid() only check the timespec is valid, but not ensure that the time is in a valid range, so check it ahead using timespec64_valid_strict() in pc_clock_settime() and return -EINVAL if not valid. There are some drivers that use tp->tv_sec and tp->tv_nsec directly to write registers without validity checks and assume that the higher layer has checked it, which is dangerous and will benefit from this, such as hclge_ptp_settime(), igb_ptp_settime_i210(), _rcar_gen4_ptp_settime(), and some drivers can remove the checks of itself. | |||||
| CVE-2024-50194 | 1 Linux | 1 Linux Kernel | 2024-11-29 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: arm64: probes: Fix uprobes for big-endian kernels The arm64 uprobes code is broken for big-endian kernels as it doesn't convert the in-memory instruction encoding (which is always little-endian) into the kernel's native endianness before analyzing and simulating instructions. This may result in a few distinct problems: * The kernel may may erroneously reject probing an instruction which can safely be probed. * The kernel may erroneously erroneously permit stepping an instruction out-of-line when that instruction cannot be stepped out-of-line safely. * The kernel may erroneously simulate instruction incorrectly dur to interpretting the byte-swapped encoding. The endianness mismatch isn't caught by the compiler or sparse because: * The arch_uprobe::{insn,ixol} fields are encoded as arrays of u8, so the compiler and sparse have no idea these contain a little-endian 32-bit value. The core uprobes code populates these with a memcpy() which similarly does not handle endianness. * While the uprobe_opcode_t type is an alias for __le32, both arch_uprobe_analyze_insn() and arch_uprobe_skip_sstep() cast from u8[] to the similarly-named probe_opcode_t, which is an alias for u32. Hence there is no endianness conversion warning. Fix this by changing the arch_uprobe::{insn,ixol} fields to __le32 and adding the appropriate __le32_to_cpu() conversions prior to consuming the instruction encoding. The core uprobes copies these fields as opaque ranges of bytes, and so is unaffected by this change. At the same time, remove MAX_UINSN_BYTES and consistently use AARCH64_INSN_SIZE for clarity. Tested with the following: | #include <stdio.h> | #include <stdbool.h> | | #define noinline __attribute__((noinline)) | | static noinline void *adrp_self(void) | { | void *addr; | | asm volatile( | " adrp %x0, adrp_self\n" | " add %x0, %x0, :lo12:adrp_self\n" | : "=r" (addr)); | } | | | int main(int argc, char *argv) | { | void *ptr = adrp_self(); | bool equal = (ptr == adrp_self); | | printf("adrp_self => %p\n" | "adrp_self() => %p\n" | "%s\n", | adrp_self, ptr, equal ? "EQUAL" : "NOT EQUAL"); | | return 0; | } .... where the adrp_self() function was compiled to: | 00000000004007e0 <adrp_self>: | 4007e0: 90000000 adrp x0, 400000 <__ehdr_start> | 4007e4: 911f8000 add x0, x0, #0x7e0 | 4007e8: d65f03c0 ret Before this patch, the ADRP is not recognized, and is assumed to be steppable, resulting in corruption of the result: | # ./adrp-self | adrp_self => 0x4007e0 | adrp_self() => 0x4007e0 | EQUAL | # echo 'p /root/adrp-self:0x007e0' > /sys/kernel/tracing/uprobe_events | # echo 1 > /sys/kernel/tracing/events/uprobes/enable | # ./adrp-self | adrp_self => 0x4007e0 | adrp_self() => 0xffffffffff7e0 | NOT EQUAL After this patch, the ADRP is correctly recognized and simulated: | # ./adrp-self | adrp_self => 0x4007e0 | adrp_self() => 0x4007e0 | EQUAL | # | # echo 'p /root/adrp-self:0x007e0' > /sys/kernel/tracing/uprobe_events | # echo 1 > /sys/kernel/tracing/events/uprobes/enable | # ./adrp-self | adrp_self => 0x4007e0 | adrp_self() => 0x4007e0 | EQUAL | |||||
| CVE-2024-50193 | 1 Linux | 1 Linux Kernel | 2024-11-29 | N/A | 7.1 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: x86/entry_32: Clear CPU buffers after register restore in NMI return CPU buffers are currently cleared after call to exc_nmi, but before register state is restored. This may be okay for MDS mitigation but not for RDFS. Because RDFS mitigation requires CPU buffers to be cleared when registers don't have any sensitive data. Move CLEAR_CPU_BUFFERS after RESTORE_ALL_NMI. | |||||
| CVE-2024-50192 | 1 Linux | 1 Linux Kernel | 2024-11-29 | N/A | 4.7 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: irqchip/gic-v4: Don't allow a VMOVP on a dying VPE Kunkun Jiang reported that there is a small window of opportunity for userspace to force a change of affinity for a VPE while the VPE has already been unmapped, but the corresponding doorbell interrupt still visible in /proc/irq/. Plug the race by checking the value of vmapp_count, which tracks whether the VPE is mapped ot not, and returning an error in this case. This involves making vmapp_count common to both GICv4.1 and its v4.0 ancestor. | |||||
| CVE-2024-50187 | 1 Linux | 1 Linux Kernel | 2024-11-27 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: drm/vc4: Stop the active perfmon before being destroyed Upon closing the file descriptor, the active performance monitor is not stopped. Although all perfmons are destroyed in `vc4_perfmon_close_file()`, the active performance monitor's pointer (`vc4->active_perfmon`) is still retained. If we open a new file descriptor and submit a few jobs with performance monitors, the driver will attempt to stop the active performance monitor using the stale pointer in `vc4->active_perfmon`. However, this pointer is no longer valid because the previous process has already terminated, and all performance monitors associated with it have been destroyed and freed. To fix this, when the active performance monitor belongs to a given process, explicitly stop it before destroying and freeing it. | |||||
| CVE-2024-50303 | 1 Linux | 1 Linux Kernel | 2024-11-27 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: resource,kexec: walk_system_ram_res_rev must retain resource flags walk_system_ram_res_rev() erroneously discards resource flags when passing the information to the callback. This causes systems with IORESOURCE_SYSRAM_DRIVER_MANAGED memory to have these resources selected during kexec to store kexec buffers if that memory happens to be at placed above normal system ram. This leads to undefined behavior after reboot. If the kexec buffer is never touched, nothing happens. If the kexec buffer is touched, it could lead to a crash (like below) or undefined behavior. Tested on a system with CXL memory expanders with driver managed memory, TPM enabled, and CONFIG_IMA_KEXEC=y. Adding printk's showed the flags were being discarded and as a result the check for IORESOURCE_SYSRAM_DRIVER_MANAGED passes. find_next_iomem_res: name(System RAM (kmem)) start(10000000000) end(1034fffffff) flags(83000200) locate_mem_hole_top_down: start(10000000000) end(1034fffffff) flags(0) [.] BUG: unable to handle page fault for address: ffff89834ffff000 [.] #PF: supervisor read access in kernel mode [.] #PF: error_code(0x0000) - not-present page [.] PGD c04c8bf067 P4D c04c8bf067 PUD c04c8be067 PMD 0 [.] Oops: 0000 [#1] SMP [.] RIP: 0010:ima_restore_measurement_list+0x95/0x4b0 [.] RSP: 0018:ffffc900000d3a80 EFLAGS: 00010286 [.] RAX: 0000000000001000 RBX: 0000000000000000 RCX: ffff89834ffff000 [.] RDX: 0000000000000018 RSI: ffff89834ffff000 RDI: ffff89834ffff018 [.] RBP: ffffc900000d3ba0 R08: 0000000000000020 R09: ffff888132b8a900 [.] R10: 4000000000000000 R11: 000000003a616d69 R12: 0000000000000000 [.] R13: ffffffff8404ac28 R14: 0000000000000000 R15: ffff89834ffff000 [.] FS: 0000000000000000(0000) GS:ffff893d44640000(0000) knlGS:0000000000000000 [.] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [.] ata5: SATA link down (SStatus 0 SControl 300) [.] CR2: ffff89834ffff000 CR3: 000001034d00f001 CR4: 0000000000770ef0 [.] PKRU: 55555554 [.] Call Trace: [.] <TASK> [.] ? __die+0x78/0xc0 [.] ? page_fault_oops+0x2a8/0x3a0 [.] ? exc_page_fault+0x84/0x130 [.] ? asm_exc_page_fault+0x22/0x30 [.] ? ima_restore_measurement_list+0x95/0x4b0 [.] ? template_desc_init_fields+0x317/0x410 [.] ? crypto_alloc_tfm_node+0x9c/0xc0 [.] ? init_ima_lsm+0x30/0x30 [.] ima_load_kexec_buffer+0x72/0xa0 [.] ima_init+0x44/0xa0 [.] __initstub__kmod_ima__373_1201_init_ima7+0x1e/0xb0 [.] ? init_ima_lsm+0x30/0x30 [.] do_one_initcall+0xad/0x200 [.] ? idr_alloc_cyclic+0xaa/0x110 [.] ? new_slab+0x12c/0x420 [.] ? new_slab+0x12c/0x420 [.] ? number+0x12a/0x430 [.] ? sysvec_apic_timer_interrupt+0xa/0x80 [.] ? asm_sysvec_apic_timer_interrupt+0x16/0x20 [.] ? parse_args+0xd4/0x380 [.] ? parse_args+0x14b/0x380 [.] kernel_init_freeable+0x1c1/0x2b0 [.] ? rest_init+0xb0/0xb0 [.] kernel_init+0x16/0x1a0 [.] ret_from_fork+0x2f/0x40 [.] ? rest_init+0xb0/0xb0 [.] ret_from_fork_asm+0x11/0x20 [.] </TASK> | |||||
| CVE-2024-53042 | 1 Linux | 1 Linux Kernel | 2024-11-27 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: ipv4: ip_tunnel: Fix suspicious RCU usage warning in ip_tunnel_init_flow() There are code paths from which the function is called without holding the RCU read lock, resulting in a suspicious RCU usage warning [1]. Fix by using l3mdev_master_upper_ifindex_by_index() which will acquire the RCU read lock before calling l3mdev_master_upper_ifindex_by_index_rcu(). [1] WARNING: suspicious RCU usage 6.12.0-rc3-custom-gac8f72681cf2 #141 Not tainted ----------------------------- net/core/dev.c:876 RCU-list traversed in non-reader section!! other info that might help us debug this: rcu_scheduler_active = 2, debug_locks = 1 1 lock held by ip/361: #0: ffffffff86fc7cb0 (rtnl_mutex){+.+.}-{3:3}, at: rtnetlink_rcv_msg+0x377/0xf60 stack backtrace: CPU: 3 UID: 0 PID: 361 Comm: ip Not tainted 6.12.0-rc3-custom-gac8f72681cf2 #141 Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011 Call Trace: <TASK> dump_stack_lvl+0xba/0x110 lockdep_rcu_suspicious.cold+0x4f/0xd6 dev_get_by_index_rcu+0x1d3/0x210 l3mdev_master_upper_ifindex_by_index_rcu+0x2b/0xf0 ip_tunnel_bind_dev+0x72f/0xa00 ip_tunnel_newlink+0x368/0x7a0 ipgre_newlink+0x14c/0x170 __rtnl_newlink+0x1173/0x19c0 rtnl_newlink+0x6c/0xa0 rtnetlink_rcv_msg+0x3cc/0xf60 netlink_rcv_skb+0x171/0x450 netlink_unicast+0x539/0x7f0 netlink_sendmsg+0x8c1/0xd80 ____sys_sendmsg+0x8f9/0xc20 ___sys_sendmsg+0x197/0x1e0 __sys_sendmsg+0x122/0x1f0 do_syscall_64+0xbb/0x1d0 entry_SYSCALL_64_after_hwframe+0x77/0x7f | |||||
| CVE-2024-53046 | 1 Linux | 1 Linux Kernel | 2024-11-27 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: arm64: dts: imx8ulp: correct the flexspi compatible string The flexspi on imx8ulp only has 16 LUTs, and imx8mm flexspi has 32 LUTs, so correct the compatible string here, otherwise will meet below error: [ 1.119072] ------------[ cut here ]------------ [ 1.123926] WARNING: CPU: 0 PID: 1 at drivers/spi/spi-nxp-fspi.c:855 nxp_fspi_exec_op+0xb04/0xb64 [ 1.133239] Modules linked in: [ 1.136448] CPU: 0 UID: 0 PID: 1 Comm: swapper/0 Not tainted 6.11.0-rc6-next-20240902-00001-g131bf9439dd9 #69 [ 1.146821] Hardware name: NXP i.MX8ULP EVK (DT) [ 1.151647] pstate: 40000005 (nZcv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 1.158931] pc : nxp_fspi_exec_op+0xb04/0xb64 [ 1.163496] lr : nxp_fspi_exec_op+0xa34/0xb64 [ 1.168060] sp : ffff80008002b2a0 [ 1.171526] x29: ffff80008002b2d0 x28: 0000000000000000 x27: 0000000000000000 [ 1.179002] x26: ffff2eb645542580 x25: ffff800080610014 x24: ffff800080610000 [ 1.186480] x23: ffff2eb645548080 x22: 0000000000000006 x21: ffff2eb6455425e0 [ 1.193956] x20: 0000000000000000 x19: ffff80008002b5e0 x18: ffffffffffffffff [ 1.201432] x17: ffff2eb644467508 x16: 0000000000000138 x15: 0000000000000002 [ 1.208907] x14: 0000000000000000 x13: ffff2eb6400d8080 x12: 00000000ffffff00 [ 1.216378] x11: 0000000000000000 x10: ffff2eb6400d8080 x9 : ffff2eb697adca80 [ 1.223850] x8 : ffff2eb697ad3cc0 x7 : 0000000100000000 x6 : 0000000000000001 [ 1.231324] x5 : 0000000000000000 x4 : 0000000000000000 x3 : 00000000000007a6 [ 1.238795] x2 : 0000000000000000 x1 : 00000000000001ce x0 : 00000000ffffff92 [ 1.246267] Call trace: [ 1.248824] nxp_fspi_exec_op+0xb04/0xb64 [ 1.253031] spi_mem_exec_op+0x3a0/0x430 [ 1.257139] spi_nor_read_id+0x80/0xcc [ 1.261065] spi_nor_scan+0x1ec/0xf10 [ 1.264901] spi_nor_probe+0x108/0x2fc [ 1.268828] spi_mem_probe+0x6c/0xbc [ 1.272574] spi_probe+0x84/0xe4 [ 1.275958] really_probe+0xbc/0x29c [ 1.279713] __driver_probe_device+0x78/0x12c [ 1.284277] driver_probe_device+0xd8/0x15c [ 1.288660] __device_attach_driver+0xb8/0x134 [ 1.293316] bus_for_each_drv+0x88/0xe8 [ 1.297337] __device_attach+0xa0/0x190 [ 1.301353] device_initial_probe+0x14/0x20 [ 1.305734] bus_probe_device+0xac/0xb0 [ 1.309752] device_add+0x5d0/0x790 [ 1.313408] __spi_add_device+0x134/0x204 [ 1.317606] of_register_spi_device+0x3b4/0x590 [ 1.322348] spi_register_controller+0x47c/0x754 [ 1.327181] devm_spi_register_controller+0x4c/0xa4 [ 1.332289] nxp_fspi_probe+0x1cc/0x2b0 [ 1.336307] platform_probe+0x68/0xc4 [ 1.340145] really_probe+0xbc/0x29c [ 1.343893] __driver_probe_device+0x78/0x12c [ 1.348457] driver_probe_device+0xd8/0x15c [ 1.352838] __driver_attach+0x90/0x19c [ 1.356857] bus_for_each_dev+0x7c/0xdc [ 1.360877] driver_attach+0x24/0x30 [ 1.364624] bus_add_driver+0xe4/0x208 [ 1.368552] driver_register+0x5c/0x124 [ 1.372573] __platform_driver_register+0x28/0x34 [ 1.377497] nxp_fspi_driver_init+0x1c/0x28 [ 1.381888] do_one_initcall+0x80/0x1c8 [ 1.385908] kernel_init_freeable+0x1c4/0x28c [ 1.390472] kernel_init+0x20/0x1d8 [ 1.394138] ret_from_fork+0x10/0x20 [ 1.397885] ---[ end trace 0000000000000000 ]--- [ 1.407908] ------------[ cut here ]------------ | |||||
| CVE-2024-53047 | 1 Linux | 1 Linux Kernel | 2024-11-27 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: mptcp: init: protect sched with rcu_read_lock Enabling CONFIG_PROVE_RCU_LIST with its dependence CONFIG_RCU_EXPERT creates this splat when an MPTCP socket is created: ============================= WARNING: suspicious RCU usage 6.12.0-rc2+ #11 Not tainted ----------------------------- net/mptcp/sched.c:44 RCU-list traversed in non-reader section!! other info that might help us debug this: rcu_scheduler_active = 2, debug_locks = 1 no locks held by mptcp_connect/176. stack backtrace: CPU: 0 UID: 0 PID: 176 Comm: mptcp_connect Not tainted 6.12.0-rc2+ #11 Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011 Call Trace: <TASK> dump_stack_lvl (lib/dump_stack.c:123) lockdep_rcu_suspicious (kernel/locking/lockdep.c:6822) mptcp_sched_find (net/mptcp/sched.c:44 (discriminator 7)) mptcp_init_sock (net/mptcp/protocol.c:2867 (discriminator 1)) ? sock_init_data_uid (arch/x86/include/asm/atomic.h:28) inet_create.part.0.constprop.0 (net/ipv4/af_inet.c:386) ? __sock_create (include/linux/rcupdate.h:347 (discriminator 1)) __sock_create (net/socket.c:1576) __sys_socket (net/socket.c:1671) ? __pfx___sys_socket (net/socket.c:1712) ? do_user_addr_fault (arch/x86/mm/fault.c:1419 (discriminator 1)) __x64_sys_socket (net/socket.c:1728) do_syscall_64 (arch/x86/entry/common.c:52 (discriminator 1)) entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:130) That's because when the socket is initialised, rcu_read_lock() is not used despite the explicit comment written above the declaration of mptcp_sched_find() in sched.c. Adding the missing lock/unlock avoids the warning. | |||||
| CVE-2024-53048 | 1 Linux | 1 Linux Kernel | 2024-11-27 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: ice: fix crash on probe for DPLL enabled E810 LOM The E810 Lan On Motherboard (LOM) design is vendor specific. Intel provides the reference design, but it is up to vendor on the final product design. For some cases, like Linux DPLL support, the static values defined in the driver does not reflect the actual LOM design. Current implementation of dpll pins is causing the crash on probe of the ice driver for such DPLL enabled E810 LOM designs: WARNING: (...) at drivers/dpll/dpll_core.c:495 dpll_pin_get+0x2c4/0x330 ... Call Trace: <TASK> ? __warn+0x83/0x130 ? dpll_pin_get+0x2c4/0x330 ? report_bug+0x1b7/0x1d0 ? handle_bug+0x42/0x70 ? exc_invalid_op+0x18/0x70 ? asm_exc_invalid_op+0x1a/0x20 ? dpll_pin_get+0x117/0x330 ? dpll_pin_get+0x2c4/0x330 ? dpll_pin_get+0x117/0x330 ice_dpll_get_pins.isra.0+0x52/0xe0 [ice] ... The number of dpll pins enabled by LOM vendor is greater than expected and defined in the driver for Intel designed NICs, which causes the crash. Prevent the crash and allow generic pin initialization within Linux DPLL subsystem for DPLL enabled E810 LOM designs. Newly designed solution for described issue will be based on "per HW design" pin initialization. It requires pin information dynamically acquired from the firmware and is already in progress, planned for next-tree only. | |||||
| CVE-2024-50173 | 1 Linux | 1 Linux Kernel | 2024-11-27 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: drm/panthor: Fix access to uninitialized variable in tick_ctx_cleanup() The group variable can't be used to retrieve ptdev in our second loop, because it points to the previously iterated list_head, not a valid group. Get the ptdev object from the scheduler instead. | |||||
| CVE-2024-50174 | 1 Linux | 1 Linux Kernel | 2024-11-27 | N/A | 4.7 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: drm/panthor: Fix race when converting group handle to group object XArray provides it's own internal lock which protects the internal array when entries are being simultaneously added and removed. However there is still a race between retrieving the pointer from the XArray and incrementing the reference count. To avoid this race simply hold the internal XArray lock when incrementing the reference count, this ensures there cannot be a racing call to xa_erase(). | |||||
| CVE-2024-50175 | 1 Linux | 1 Linux Kernel | 2024-11-27 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: media: qcom: camss: Remove use_count guard in stop_streaming The use_count check was introduced so that multiple concurrent Raw Data Interfaces RDIs could be driven by different virtual channels VCs on the CSIPHY input driving the video pipeline. This is an invalid use of use_count though as use_count pertains to the number of times a video entity has been opened by user-space not the number of active streams. If use_count and stream-on count don't agree then stop_streaming() will break as is currently the case and has become apparent when using CAMSS with libcamera's released softisp 0.3. The use of use_count like this is a bit hacky and right now breaks regular usage of CAMSS for a single stream case. Stopping qcam results in the splat below, and then it cannot be started again and any attempts to do so fails with -EBUSY. [ 1265.509831] WARNING: CPU: 5 PID: 919 at drivers/media/common/videobuf2/videobuf2-core.c:2183 __vb2_queue_cancel+0x230/0x2c8 [videobuf2_common] ... [ 1265.510630] Call trace: [ 1265.510636] __vb2_queue_cancel+0x230/0x2c8 [videobuf2_common] [ 1265.510648] vb2_core_streamoff+0x24/0xcc [videobuf2_common] [ 1265.510660] vb2_ioctl_streamoff+0x5c/0xa8 [videobuf2_v4l2] [ 1265.510673] v4l_streamoff+0x24/0x30 [videodev] [ 1265.510707] __video_do_ioctl+0x190/0x3f4 [videodev] [ 1265.510732] video_usercopy+0x304/0x8c4 [videodev] [ 1265.510757] video_ioctl2+0x18/0x34 [videodev] [ 1265.510782] v4l2_ioctl+0x40/0x60 [videodev] ... [ 1265.510944] videobuf2_common: driver bug: stop_streaming operation is leaving buffer 0 in active state [ 1265.511175] videobuf2_common: driver bug: stop_streaming operation is leaving buffer 1 in active state [ 1265.511398] videobuf2_common: driver bug: stop_streaming operation is leaving buffer 2 in active st One CAMSS specific way to handle multiple VCs on the same RDI might be: - Reference count each pipeline enable for CSIPHY, CSID, VFE and RDIx. - The video buffers are already associated with msm_vfeN_rdiX so release video buffers when told to do so by stop_streaming. - Only release the power-domains for the CSIPHY, CSID and VFE when their internal refcounts drop. Either way refusing to release video buffers based on use_count is erroneous and should be reverted. The silicon enabling code for selecting VCs is perfectly fine. Its a "known missing feature" that concurrent VCs won't work with CAMSS right now. Initial testing with this code didn't show an error but, SoftISP and "real" usage with Google Hangouts breaks the upstream code pretty quickly, we need to do a partial revert and take another pass at VCs. This commit partially reverts commit 89013969e232 ("media: camss: sm8250: Pipeline starting and stopping for multiple virtual channels") | |||||
| CVE-2024-50176 | 1 Linux | 1 Linux Kernel | 2024-11-27 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: remoteproc: k3-r5: Fix error handling when power-up failed By simply bailing out, the driver was violating its rule and internal assumptions that either both or no rproc should be initialized. E.g., this could cause the first core to be available but not the second one, leading to crashes on its shutdown later on while trying to dereference that second instance. | |||||
| CVE-2024-50178 | 1 Linux | 1 Linux Kernel | 2024-11-27 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: cpufreq: loongson3: Use raw_smp_processor_id() in do_service_request() Use raw_smp_processor_id() instead of plain smp_processor_id() in do_service_request(), otherwise we may get some errors with the driver enabled: BUG: using smp_processor_id() in preemptible [00000000] code: (udev-worker)/208 caller is loongson3_cpufreq_probe+0x5c/0x250 [loongson3_cpufreq] | |||||
| CVE-2018-18689 | 14 Apple, Avanquest, Foxitsoftware and 11 more | 20 Macos, Expert Pdf Ultimate, Pdf Experte Ultimate and 17 more | 2024-11-27 | 5.0 MEDIUM | 5.3 MEDIUM |
| The Portable Document Format (PDF) specification does not provide any information regarding the concrete procedure of how to validate signatures. Consequently, a Signature Wrapping vulnerability exists in multiple products. An attacker can use /ByteRange and xref manipulations that are not detected by the signature-validation logic. This affects Foxit Reader before 9.4 and PhantomPDF before 8.3.9 and 9.x before 9.4. It also affects eXpert PDF 12 Ultimate, Expert PDF Reader, Nitro Pro, Nitro Reader, PDF Architect 6, PDF Editor 6 Pro, PDF Experte 9 Ultimate, PDFelement6 Pro, PDF Studio Viewer 2018, PDF Studio Pro, PDF-XChange Editor and Viewer, Perfect PDF 10 Premium, Perfect PDF Reader, Soda PDF, and Soda PDF Desktop. | |||||