Total
303286 CVE
| CVE | Vendors | Products | Updated | CVSS v2 | CVSS v3 |
|---|---|---|---|---|---|
| CVE-2022-49989 | 2025-06-18 | N/A | N/A | ||
| In the Linux kernel, the following vulnerability has been resolved: xen/privcmd: fix error exit of privcmd_ioctl_dm_op() The error exit of privcmd_ioctl_dm_op() is calling unlock_pages() potentially with pages being NULL, leading to a NULL dereference. Additionally lock_pages() doesn't check for pin_user_pages_fast() having been completely successful, resulting in potentially not locking all pages into memory. This could result in sporadic failures when using the related memory in user mode. Fix all of that by calling unlock_pages() always with the real number of pinned pages, which will be zero in case pages being NULL, and by checking the number of pages pinned by pin_user_pages_fast() matching the expected number of pages. | |||||
| CVE-2022-49968 | 2025-06-18 | N/A | N/A | ||
| In the Linux kernel, the following vulnerability has been resolved: ieee802154/adf7242: defer destroy_workqueue call There is a possible race condition (use-after-free) like below (FREE) | (USE) adf7242_remove | adf7242_channel cancel_delayed_work_sync | destroy_workqueue (1) | adf7242_cmd_rx | mod_delayed_work (2) | The root cause for this race is that the upper layer (ieee802154) is unaware of this detaching event and the function adf7242_channel can be called without any checks. To fix this, we can add a flag write at the beginning of adf7242_remove and add flag check in adf7242_channel. Or we can just defer the destructive operation like other commit 3e0588c291d6 ("hamradio: defer ax25 kfree after unregister_netdev") which let the ieee802154_unregister_hw() to handle the synchronization. This patch takes the second option. runs") | |||||
| CVE-2025-38014 | 2025-06-18 | N/A | N/A | ||
| In the Linux kernel, the following vulnerability has been resolved: dmaengine: idxd: Refactor remove call with idxd_cleanup() helper The idxd_cleanup() helper cleans up perfmon, interrupts, internals and so on. Refactor remove call with the idxd_cleanup() helper to avoid code duplication. Note, this also fixes the missing put_device() for idxd groups, enginces and wqs. | |||||
| CVE-2025-38016 | 2025-06-18 | N/A | N/A | ||
| In the Linux kernel, the following vulnerability has been resolved: HID: bpf: abort dispatch if device destroyed The current HID bpf implementation assumes no output report/request will go through it after hid_bpf_destroy_device() has been called. This leads to a bug that unplugging certain types of HID devices causes a cleaned- up SRCU to be accessed. The bug was previously a hidden failure until a recent x86 percpu change [1] made it access not-present pages. The bug will be triggered if the conditions below are met: A) a device under the driver has some LEDs on B) hid_ll_driver->request() is uninplemented (e.g., logitech-djreceiver) If condition A is met, hidinput_led_worker() is always scheduled *after* hid_bpf_destroy_device(). hid_destroy_device ` hid_bpf_destroy_device ` cleanup_srcu_struct(&hdev->bpf.srcu) ` hid_remove_device ` ... ` led_classdev_unregister ` led_trigger_set(led_cdev, NULL) ` led_set_brightness(led_cdev, LED_OFF) ` ... ` input_inject_event ` input_event_dispose ` hidinput_input_event ` schedule_work(&hid->led_work) [hidinput_led_worker] This is fine when condition B is not met, where hidinput_led_worker() calls hid_ll_driver->request(). This is the case for most HID drivers, which implement it or use the generic one from usbhid. The driver itself or an underlying driver will then abort processing the request. Otherwise, hidinput_led_worker() tries hid_hw_output_report() and leads to the bug. hidinput_led_worker ` hid_hw_output_report ` dispatch_hid_bpf_output_report ` srcu_read_lock(&hdev->bpf.srcu) ` srcu_read_unlock(&hdev->bpf.srcu, idx) The bug has existed since the introduction [2] of dispatch_hid_bpf_output_report(). However, the same bug also exists in dispatch_hid_bpf_raw_requests(), and I've reproduced (no visible effect because of the lack of [1], but confirmed bpf.destroyed == 1) the bug against the commit (i.e., the Fixes:) introducing the function. This is because hidinput_led_worker() falls back to hid_hw_raw_request() when hid_ll_driver->output_report() is uninplemented (e.g., logitech- djreceiver). hidinput_led_worker ` hid_hw_output_report: -ENOSYS ` hid_hw_raw_request ` dispatch_hid_bpf_raw_requests ` srcu_read_lock(&hdev->bpf.srcu) ` srcu_read_unlock(&hdev->bpf.srcu, idx) Fix the issue by returning early in the two mentioned functions if hid_bpf has been marked as destroyed. Though dispatch_hid_bpf_device_event() handles input events, and there is no evidence that it may be called after the destruction, the same check, as a safety net, is also added to it to maintain the consistency among all dispatch functions. The impact of the bug on other architectures is unclear. Even if it acts as a hidden failure, this is still dangerous because it corrupts whatever is on the address calculated by SRCU. Thus, CC'ing the stable list. [1]: commit 9d7de2aa8b41 ("x86/percpu/64: Use relative percpu offsets") [2]: commit 9286675a2aed ("HID: bpf: add HID-BPF hooks for hid_hw_output_report") | |||||
| CVE-2025-38010 | 2025-06-18 | N/A | N/A | ||
| In the Linux kernel, the following vulnerability has been resolved: phy: tegra: xusb: Use a bitmask for UTMI pad power state tracking The current implementation uses bias_pad_enable as a reference count to manage the shared bias pad for all UTMI PHYs. However, during system suspension with connected USB devices, multiple power-down requests for the UTMI pad result in a mismatch in the reference count, which in turn produces warnings such as: [ 237.762967] WARNING: CPU: 10 PID: 1618 at tegra186_utmi_pad_power_down+0x160/0x170 [ 237.763103] Call trace: [ 237.763104] tegra186_utmi_pad_power_down+0x160/0x170 [ 237.763107] tegra186_utmi_phy_power_off+0x10/0x30 [ 237.763110] phy_power_off+0x48/0x100 [ 237.763113] tegra_xusb_enter_elpg+0x204/0x500 [ 237.763119] tegra_xusb_suspend+0x48/0x140 [ 237.763122] platform_pm_suspend+0x2c/0xb0 [ 237.763125] dpm_run_callback.isra.0+0x20/0xa0 [ 237.763127] __device_suspend+0x118/0x330 [ 237.763129] dpm_suspend+0x10c/0x1f0 [ 237.763130] dpm_suspend_start+0x88/0xb0 [ 237.763132] suspend_devices_and_enter+0x120/0x500 [ 237.763135] pm_suspend+0x1ec/0x270 The root cause was traced back to the dynamic power-down changes introduced in commit a30951d31b25 ("xhci: tegra: USB2 pad power controls"), where the UTMI pad was being powered down without verifying its current state. This unbalanced behavior led to discrepancies in the reference count. To rectify this issue, this patch replaces the single reference counter with a bitmask, renamed to utmi_pad_enabled. Each bit in the mask corresponds to one of the four USB2 PHYs, allowing us to track each pad's enablement status individually. With this change: - The bias pad is powered on only when the mask is clear. - Each UTMI pad is powered on or down based on its corresponding bit in the mask, preventing redundant operations. - The overall power state of the shared bias pad is maintained correctly during suspend/resume cycles. The mutex used to prevent race conditions during UTMI pad enable/disable operations has been moved from the tegra186_utmi_bias_pad_power_on/off functions to the parent functions tegra186_utmi_pad_power_on/down. This change ensures that there are no race conditions when updating the bitmask. | |||||
| CVE-2022-49985 | 2025-06-18 | N/A | N/A | ||
| In the Linux kernel, the following vulnerability has been resolved: bpf: Don't use tnum_range on array range checking for poke descriptors Hsin-Wei reported a KASAN splat triggered by their BPF runtime fuzzer which is based on a customized syzkaller: BUG: KASAN: slab-out-of-bounds in bpf_int_jit_compile+0x1257/0x13f0 Read of size 8 at addr ffff888004e90b58 by task syz-executor.0/1489 CPU: 1 PID: 1489 Comm: syz-executor.0 Not tainted 5.19.0 #1 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.13.0-1ubuntu1.1 04/01/2014 Call Trace: <TASK> dump_stack_lvl+0x9c/0xc9 print_address_description.constprop.0+0x1f/0x1f0 ? bpf_int_jit_compile+0x1257/0x13f0 kasan_report.cold+0xeb/0x197 ? kvmalloc_node+0x170/0x200 ? bpf_int_jit_compile+0x1257/0x13f0 bpf_int_jit_compile+0x1257/0x13f0 ? arch_prepare_bpf_dispatcher+0xd0/0xd0 ? rcu_read_lock_sched_held+0x43/0x70 bpf_prog_select_runtime+0x3e8/0x640 ? bpf_obj_name_cpy+0x149/0x1b0 bpf_prog_load+0x102f/0x2220 ? __bpf_prog_put.constprop.0+0x220/0x220 ? find_held_lock+0x2c/0x110 ? __might_fault+0xd6/0x180 ? lock_downgrade+0x6e0/0x6e0 ? lock_is_held_type+0xa6/0x120 ? __might_fault+0x147/0x180 __sys_bpf+0x137b/0x6070 ? bpf_perf_link_attach+0x530/0x530 ? new_sync_read+0x600/0x600 ? __fget_files+0x255/0x450 ? lock_downgrade+0x6e0/0x6e0 ? fput+0x30/0x1a0 ? ksys_write+0x1a8/0x260 __x64_sys_bpf+0x7a/0xc0 ? syscall_enter_from_user_mode+0x21/0x70 do_syscall_64+0x3b/0x90 entry_SYSCALL_64_after_hwframe+0x63/0xcd RIP: 0033:0x7f917c4e2c2d The problem here is that a range of tnum_range(0, map->max_entries - 1) has limited ability to represent the concrete tight range with the tnum as the set of resulting states from value + mask can result in a superset of the actual intended range, and as such a tnum_in(range, reg->var_off) check may yield true when it shouldn't, for example tnum_range(0, 2) would result in 00XX -> v = 0000, m = 0011 such that the intended set of {0, 1, 2} is here represented by a less precise superset of {0, 1, 2, 3}. As the register is known const scalar, really just use the concrete reg->var_off.value for the upper index check. | |||||
| CVE-2022-49967 | 2025-06-18 | N/A | N/A | ||
| In the Linux kernel, the following vulnerability has been resolved: bpf: Fix a data-race around bpf_jit_limit. While reading bpf_jit_limit, it can be changed concurrently via sysctl, WRITE_ONCE() in __do_proc_doulongvec_minmax(). The size of bpf_jit_limit is long, so we need to add a paired READ_ONCE() to avoid load-tearing. | |||||
| CVE-2025-38075 | 2025-06-18 | N/A | N/A | ||
| In the Linux kernel, the following vulnerability has been resolved: scsi: target: iscsi: Fix timeout on deleted connection NOPIN response timer may expire on a deleted connection and crash with such logs: Did not receive response to NOPIN on CID: 0, failing connection for I_T Nexus (null),i,0x00023d000125,iqn.2017-01.com.iscsi.target,t,0x3d BUG: Kernel NULL pointer dereference on read at 0x00000000 NIP strlcpy+0x8/0xb0 LR iscsit_fill_cxn_timeout_err_stats+0x5c/0xc0 [iscsi_target_mod] Call Trace: iscsit_handle_nopin_response_timeout+0xfc/0x120 [iscsi_target_mod] call_timer_fn+0x58/0x1f0 run_timer_softirq+0x740/0x860 __do_softirq+0x16c/0x420 irq_exit+0x188/0x1c0 timer_interrupt+0x184/0x410 That is because nopin response timer may be re-started on nopin timer expiration. Stop nopin timer before stopping the nopin response timer to be sure that no one of them will be re-started. | |||||
| CVE-2022-50014 | 2025-06-18 | N/A | N/A | ||
| In the Linux kernel, the following vulnerability has been resolved: mm/gup: fix FOLL_FORCE COW security issue and remove FOLL_COW Ever since the Dirty COW (CVE-2016-5195) security issue happened, we know that FOLL_FORCE can be possibly dangerous, especially if there are races that can be exploited by user space. Right now, it would be sufficient to have some code that sets a PTE of a R/O-mapped shared page dirty, in order for it to erroneously become writable by FOLL_FORCE. The implications of setting a write-protected PTE dirty might not be immediately obvious to everyone. And in fact ever since commit 9ae0f87d009c ("mm/shmem: unconditionally set pte dirty in mfill_atomic_install_pte"), we can use UFFDIO_CONTINUE to map a shmem page R/O while marking the pte dirty. This can be used by unprivileged user space to modify tmpfs/shmem file content even if the user does not have write permissions to the file, and to bypass memfd write sealing -- Dirty COW restricted to tmpfs/shmem (CVE-2022-2590). To fix such security issues for good, the insight is that we really only need that fancy retry logic (FOLL_COW) for COW mappings that are not writable (!VM_WRITE). And in a COW mapping, we really only broke COW if we have an exclusive anonymous page mapped. If we have something else mapped, or the mapped anonymous page might be shared (!PageAnonExclusive), we have to trigger a write fault to break COW. If we don't find an exclusive anonymous page when we retry, we have to trigger COW breaking once again because something intervened. Let's move away from this mandatory-retry + dirty handling and rely on our PageAnonExclusive() flag for making a similar decision, to use the same COW logic as in other kernel parts here as well. In case we stumble over a PTE in a COW mapping that does not map an exclusive anonymous page, COW was not properly broken and we have to trigger a fake write-fault to break COW. Just like we do in can_change_pte_writable() added via commit 64fe24a3e05e ("mm/mprotect: try avoiding write faults for exclusive anonymous pages when changing protection") and commit 76aefad628aa ("mm/mprotect: fix soft-dirty check in can_change_pte_writable()"), take care of softdirty and uffd-wp manually. For example, a write() via /proc/self/mem to a uffd-wp-protected range has to fail instead of silently granting write access and bypassing the userspace fault handler. Note that FOLL_FORCE is not only used for debug access, but also triggered by applications without debug intentions, for example, when pinning pages via RDMA. This fixes CVE-2022-2590. Note that only x86_64 and aarch64 are affected, because only those support CONFIG_HAVE_ARCH_USERFAULTFD_MINOR. Fortunately, FOLL_COW is no longer required to handle FOLL_FORCE. So let's just get rid of it. Thanks to Nadav Amit for pointing out that the pte_dirty() check in FOLL_FORCE code is problematic and might be exploitable. Note 1: We don't check for the PTE being dirty because it doesn't matter for making a "was COWed" decision anymore, and whoever modifies the page has to set the page dirty either way. Note 2: Kernels before extended uffd-wp support and before PageAnonExclusive (< 5.19) can simply revert the problematic commit instead and be safe regarding UFFDIO_CONTINUE. A backport to v5.19 requires minor adjustments due to lack of vma_soft_dirty_enabled(). | |||||
| CVE-2025-38058 | 2025-06-18 | N/A | N/A | ||
| In the Linux kernel, the following vulnerability has been resolved: __legitimize_mnt(): check for MNT_SYNC_UMOUNT should be under mount_lock ... or we risk stealing final mntput from sync umount - raising mnt_count after umount(2) has verified that victim is not busy, but before it has set MNT_SYNC_UMOUNT; in that case __legitimize_mnt() doesn't see that it's safe to quietly undo mnt_count increment and leaves dropping the reference to caller, where it'll be a full-blown mntput(). Check under mount_lock is needed; leaving the current one done before taking that makes no sense - it's nowhere near common enough to bother with. | |||||
| CVE-2025-38029 | 2025-06-18 | N/A | N/A | ||
| In the Linux kernel, the following vulnerability has been resolved: kasan: avoid sleepable page allocation from atomic context apply_to_pte_range() enters the lazy MMU mode and then invokes kasan_populate_vmalloc_pte() callback on each page table walk iteration. However, the callback can go into sleep when trying to allocate a single page, e.g. if an architecutre disables preemption on lazy MMU mode enter. On s390 if make arch_enter_lazy_mmu_mode() -> preempt_enable() and arch_leave_lazy_mmu_mode() -> preempt_disable(), such crash occurs: [ 0.663336] BUG: sleeping function called from invalid context at ./include/linux/sched/mm.h:321 [ 0.663348] in_atomic(): 1, irqs_disabled(): 0, non_block: 0, pid: 2, name: kthreadd [ 0.663358] preempt_count: 1, expected: 0 [ 0.663366] RCU nest depth: 0, expected: 0 [ 0.663375] no locks held by kthreadd/2. [ 0.663383] Preemption disabled at: [ 0.663386] [<0002f3284cbb4eda>] apply_to_pte_range+0xfa/0x4a0 [ 0.663405] CPU: 0 UID: 0 PID: 2 Comm: kthreadd Not tainted 6.15.0-rc5-gcc-kasan-00043-gd76bb1ebb558-dirty #162 PREEMPT [ 0.663408] Hardware name: IBM 3931 A01 701 (KVM/Linux) [ 0.663409] Call Trace: [ 0.663410] [<0002f3284c385f58>] dump_stack_lvl+0xe8/0x140 [ 0.663413] [<0002f3284c507b9e>] __might_resched+0x66e/0x700 [ 0.663415] [<0002f3284cc4f6c0>] __alloc_frozen_pages_noprof+0x370/0x4b0 [ 0.663419] [<0002f3284ccc73c0>] alloc_pages_mpol+0x1a0/0x4a0 [ 0.663421] [<0002f3284ccc8518>] alloc_frozen_pages_noprof+0x88/0xc0 [ 0.663424] [<0002f3284ccc8572>] alloc_pages_noprof+0x22/0x120 [ 0.663427] [<0002f3284cc341ac>] get_free_pages_noprof+0x2c/0xc0 [ 0.663429] [<0002f3284cceba70>] kasan_populate_vmalloc_pte+0x50/0x120 [ 0.663433] [<0002f3284cbb4ef8>] apply_to_pte_range+0x118/0x4a0 [ 0.663435] [<0002f3284cbc7c14>] apply_to_pmd_range+0x194/0x3e0 [ 0.663437] [<0002f3284cbc99be>] __apply_to_page_range+0x2fe/0x7a0 [ 0.663440] [<0002f3284cbc9e88>] apply_to_page_range+0x28/0x40 [ 0.663442] [<0002f3284ccebf12>] kasan_populate_vmalloc+0x82/0xa0 [ 0.663445] [<0002f3284cc1578c>] alloc_vmap_area+0x34c/0xc10 [ 0.663448] [<0002f3284cc1c2a6>] __get_vm_area_node+0x186/0x2a0 [ 0.663451] [<0002f3284cc1e696>] __vmalloc_node_range_noprof+0x116/0x310 [ 0.663454] [<0002f3284cc1d950>] __vmalloc_node_noprof+0xd0/0x110 [ 0.663457] [<0002f3284c454b88>] alloc_thread_stack_node+0xf8/0x330 [ 0.663460] [<0002f3284c458d56>] dup_task_struct+0x66/0x4d0 [ 0.663463] [<0002f3284c45be90>] copy_process+0x280/0x4b90 [ 0.663465] [<0002f3284c460940>] kernel_clone+0xd0/0x4b0 [ 0.663467] [<0002f3284c46115e>] kernel_thread+0xbe/0xe0 [ 0.663469] [<0002f3284c4e440e>] kthreadd+0x50e/0x7f0 [ 0.663472] [<0002f3284c38c04a>] __ret_from_fork+0x8a/0xf0 [ 0.663475] [<0002f3284ed57ff2>] ret_from_fork+0xa/0x38 Instead of allocating single pages per-PTE, bulk-allocate the shadow memory prior to applying kasan_populate_vmalloc_pte() callback on a page range. | |||||
| CVE-2025-38045 | 2025-06-18 | N/A | N/A | ||
| In the Linux kernel, the following vulnerability has been resolved: wifi: iwlwifi: fix debug actions order The order of actions taken for debug was implemented incorrectly. Now we implemented the dump split and do the FW reset only in the middle of the dump (rather than the FW killing itself on error.) As a result, some of the actions taken when applying the config will now crash the device, so we need to fix the order. | |||||
| CVE-2022-49991 | 2025-06-18 | N/A | N/A | ||
| In the Linux kernel, the following vulnerability has been resolved: mm/hugetlb: avoid corrupting page->mapping in hugetlb_mcopy_atomic_pte In MCOPY_ATOMIC_CONTINUE case with a non-shared VMA, pages in the page cache are installed in the ptes. But hugepage_add_new_anon_rmap is called for them mistakenly because they're not vm_shared. This will corrupt the page->mapping used by page cache code. | |||||
| CVE-2022-49975 | 2025-06-18 | N/A | N/A | ||
| In the Linux kernel, the following vulnerability has been resolved: bpf: Don't redirect packets with invalid pkt_len Syzbot found an issue [1]: fq_codel_drop() try to drop a flow whitout any skbs, that is, the flow->head is null. The root cause, as the [2] says, is because that bpf_prog_test_run_skb() run a bpf prog which redirects empty skbs. So we should determine whether the length of the packet modified by bpf prog or others like bpf_prog_test is valid before forwarding it directly. | |||||
| CVE-2025-38050 | 2025-06-18 | N/A | N/A | ||
| In the Linux kernel, the following vulnerability has been resolved: mm/hugetlb: fix kernel NULL pointer dereference when replacing free hugetlb folios A kernel crash was observed when replacing free hugetlb folios: BUG: kernel NULL pointer dereference, address: 0000000000000028 PGD 0 P4D 0 Oops: Oops: 0000 [#1] SMP NOPTI CPU: 28 UID: 0 PID: 29639 Comm: test_cma.sh Tainted 6.15.0-rc6-zp #41 PREEMPT(voluntary) RIP: 0010:alloc_and_dissolve_hugetlb_folio+0x1d/0x1f0 RSP: 0018:ffffc9000b30fa90 EFLAGS: 00010286 RAX: 0000000000000000 RBX: 0000000000342cca RCX: ffffea0043000000 RDX: ffffc9000b30fb08 RSI: ffffea0043000000 RDI: 0000000000000000 RBP: ffffc9000b30fb20 R08: 0000000000001000 R09: 0000000000000000 R10: ffff88886f92eb00 R11: 0000000000000000 R12: ffffea0043000000 R13: 0000000000000000 R14: 00000000010c0200 R15: 0000000000000004 FS: 00007fcda5f14740(0000) GS:ffff8888ec1d8000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000028 CR3: 0000000391402000 CR4: 0000000000350ef0 Call Trace: <TASK> replace_free_hugepage_folios+0xb6/0x100 alloc_contig_range_noprof+0x18a/0x590 ? srso_return_thunk+0x5/0x5f ? down_read+0x12/0xa0 ? srso_return_thunk+0x5/0x5f cma_range_alloc.constprop.0+0x131/0x290 __cma_alloc+0xcf/0x2c0 cma_alloc_write+0x43/0xb0 simple_attr_write_xsigned.constprop.0.isra.0+0xb2/0x110 debugfs_attr_write+0x46/0x70 full_proxy_write+0x62/0xa0 vfs_write+0xf8/0x420 ? srso_return_thunk+0x5/0x5f ? filp_flush+0x86/0xa0 ? srso_return_thunk+0x5/0x5f ? filp_close+0x1f/0x30 ? srso_return_thunk+0x5/0x5f ? do_dup2+0xaf/0x160 ? srso_return_thunk+0x5/0x5f ksys_write+0x65/0xe0 do_syscall_64+0x64/0x170 entry_SYSCALL_64_after_hwframe+0x76/0x7e There is a potential race between __update_and_free_hugetlb_folio() and replace_free_hugepage_folios(): CPU1 CPU2 __update_and_free_hugetlb_folio replace_free_hugepage_folios folio_test_hugetlb(folio) -- It's still hugetlb folio. __folio_clear_hugetlb(folio) hugetlb_free_folio(folio) h = folio_hstate(folio) -- Here, h is NULL pointer When the above race condition occurs, folio_hstate(folio) returns NULL, and subsequent access to this NULL pointer will cause the system to crash. To resolve this issue, execute folio_hstate(folio) under the protection of the hugetlb_lock lock, ensuring that folio_hstate(folio) does not return NULL. | |||||
| CVE-2022-49957 | 2025-06-18 | N/A | N/A | ||
| In the Linux kernel, the following vulnerability has been resolved: kcm: fix strp_init() order and cleanup strp_init() is called just a few lines above this csk->sk_user_data check, it also initializes strp->work etc., therefore, it is unnecessary to call strp_done() to cancel the freshly initialized work. And if sk_user_data is already used by KCM, psock->strp should not be touched, particularly strp->work state, so we need to move strp_init() after the csk->sk_user_data check. This also makes a lockdep warning reported by syzbot go away. | |||||
| CVE-2022-49969 | 2025-06-18 | N/A | N/A | ||
| In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: clear optc underflow before turn off odm clock [Why] After ODM clock off, optc underflow bit will be kept there always and clear not work. We need to clear that before clock off. [How] Clear that if have when clock off. | |||||
| CVE-2025-51381 | 2025-06-18 | N/A | 9.8 CRITICAL | ||
| An authentication bypass vulnerability exists in KCM3100 Ver1.4.2 and earlier. If this vulnerability is exploited, an attacker may bypass the authentication of the product from within the LAN to which the product is connected. | |||||
| CVE-2022-49956 | 2025-06-18 | N/A | N/A | ||
| In the Linux kernel, the following vulnerability has been resolved: staging: rtl8712: fix use after free bugs _Read/Write_MACREG callbacks are NULL so the read/write_macreg_hdl() functions don't do anything except free the "pcmd" pointer. It results in a use after free. Delete them. | |||||
| CVE-2022-49934 | 2025-06-18 | N/A | N/A | ||
| In the Linux kernel, the following vulnerability has been resolved: wifi: mac80211: Fix UAF in ieee80211_scan_rx() ieee80211_scan_rx() tries to access scan_req->flags after a null check, but a UAF is observed when the scan is completed and __ieee80211_scan_completed() executes, which then calls cfg80211_scan_done() leading to the freeing of scan_req. Since scan_req is rcu_dereference()'d, prevent the racing in __ieee80211_scan_completed() by ensuring that from mac80211's POV it is no longer accessed from an RCU read critical section before we call cfg80211_scan_done(). | |||||