Filtered by vendor Linux
Subscribe
Total
10571 CVE
| CVE | Vendors | Products | Updated | CVSS v2 | CVSS v3 |
|---|---|---|---|---|---|
| CVE-2022-48938 | 1 Linux | 1 Linux Kernel | 2024-11-08 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: CDC-NCM: avoid overflow in sanity checking A broken device may give an extreme offset like 0xFFF0 and a reasonable length for a fragment. In the sanity check as formulated now, this will create an integer overflow, defeating the sanity check. Both offset and offset + len need to be checked in such a manner that no overflow can occur. And those quantities should be unsigned. | |||||
| CVE-2022-48910 | 1 Linux | 1 Linux Kernel | 2024-11-08 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: net: ipv6: ensure we call ipv6_mc_down() at most once There are two reasons for addrconf_notify() to be called with NETDEV_DOWN: either the network device is actually going down, or IPv6 was disabled on the interface. If either of them stays down while the other is toggled, we repeatedly call the code for NETDEV_DOWN, including ipv6_mc_down(), while never calling the corresponding ipv6_mc_up() in between. This will cause a new entry in idev->mc_tomb to be allocated for each multicast group the interface is subscribed to, which in turn leaks one struct ifmcaddr6 per nontrivial multicast group the interface is subscribed to. The following reproducer will leak at least $n objects: ip addr add ff2e::4242/32 dev eth0 autojoin sysctl -w net.ipv6.conf.eth0.disable_ipv6=1 for i in $(seq 1 $n); do ip link set up eth0; ip link set down eth0 done Joining groups with IPV6_ADD_MEMBERSHIP (unprivileged) or setting the sysctl net.ipv6.conf.eth0.forwarding to 1 (=> subscribing to ff02::2) can also be used to create a nontrivial idev->mc_list, which will the leak objects with the right up-down-sequence. Based on both sources for NETDEV_DOWN events the interface IPv6 state should be considered: - not ready if the network interface is not ready OR IPv6 is disabled for it - ready if the network interface is ready AND IPv6 is enabled for it The functions ipv6_mc_up() and ipv6_down() should only be run when this state changes. Implement this by remembering when the IPv6 state is ready, and only run ipv6_mc_down() if it actually changed from ready to not ready. The other direction (not ready -> ready) already works correctly, as: - the interface notification triggered codepath for NETDEV_UP / NETDEV_CHANGE returns early if ipv6 is disabled, and - the disable_ipv6=0 triggered codepath skips fully initializing the interface as long as addrconf_link_ready(dev) returns false - calling ipv6_mc_up() repeatedly does not leak anything | |||||
| CVE-2024-0134 | 2 Linux, Nvidia | 3 Linux Kernel, Nvidia Container Toolkit, Nvidia Gpu Operator | 2024-11-08 | N/A | 4.1 MEDIUM |
| NVIDIA Container Toolkit and NVIDIA GPU Operator for Linux contain a UNIX vulnerability where a specially crafted container image can lead to the creation of unauthorized files on the host. The name and location of the files cannot be controlled by an attacker. A successful exploit of this vulnerability might lead to data tampering. | |||||
| CVE-2024-0129 | 4 Apple, Linux, Microsoft and 1 more | 4 Macos, Linux Kernel, Windows and 1 more | 2024-11-08 | N/A | 7.8 HIGH |
| NVIDIA NeMo contains a vulnerability in SaveRestoreConnector where a user may cause a path traversal issue via an unsafe .tar file extraction. A successful exploit of this vulnerability may lead to code execution and data tampering. | |||||
| CVE-2024-50135 | 1 Linux | 1 Linux Kernel | 2024-11-08 | N/A | 4.7 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: nvme-pci: fix race condition between reset and nvme_dev_disable() nvme_dev_disable() modifies the dev->online_queues field, therefore nvme_pci_update_nr_queues() should avoid racing against it, otherwise we could end up passing invalid values to blk_mq_update_nr_hw_queues(). WARNING: CPU: 39 PID: 61303 at drivers/pci/msi/api.c:347 pci_irq_get_affinity+0x187/0x210 Workqueue: nvme-reset-wq nvme_reset_work [nvme] RIP: 0010:pci_irq_get_affinity+0x187/0x210 Call Trace: <TASK> ? blk_mq_pci_map_queues+0x87/0x3c0 ? pci_irq_get_affinity+0x187/0x210 blk_mq_pci_map_queues+0x87/0x3c0 nvme_pci_map_queues+0x189/0x460 [nvme] blk_mq_update_nr_hw_queues+0x2a/0x40 nvme_reset_work+0x1be/0x2a0 [nvme] Fix the bug by locking the shutdown_lock mutex before using dev->online_queues. Give up if nvme_dev_disable() is running or if it has been executed already. | |||||
| CVE-2024-50136 | 1 Linux | 1 Linux Kernel | 2024-11-08 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: net/mlx5: Unregister notifier on eswitch init failure It otherwise remains registered and a subsequent attempt at eswitch enabling might trigger warnings of the sort: [ 682.589148] ------------[ cut here ]------------ [ 682.590204] notifier callback eswitch_vport_event [mlx5_core] already registered [ 682.590256] WARNING: CPU: 13 PID: 2660 at kernel/notifier.c:31 notifier_chain_register+0x3e/0x90 [...snipped] [ 682.610052] Call Trace: [ 682.610369] <TASK> [ 682.610663] ? __warn+0x7c/0x110 [ 682.611050] ? notifier_chain_register+0x3e/0x90 [ 682.611556] ? report_bug+0x148/0x170 [ 682.611977] ? handle_bug+0x36/0x70 [ 682.612384] ? exc_invalid_op+0x13/0x60 [ 682.612817] ? asm_exc_invalid_op+0x16/0x20 [ 682.613284] ? notifier_chain_register+0x3e/0x90 [ 682.613789] atomic_notifier_chain_register+0x25/0x40 [ 682.614322] mlx5_eswitch_enable_locked+0x1d4/0x3b0 [mlx5_core] [ 682.614965] mlx5_eswitch_enable+0xc9/0x100 [mlx5_core] [ 682.615551] mlx5_device_enable_sriov+0x25/0x340 [mlx5_core] [ 682.616170] mlx5_core_sriov_configure+0x50/0x170 [mlx5_core] [ 682.616789] sriov_numvfs_store+0xb0/0x1b0 [ 682.617248] kernfs_fop_write_iter+0x117/0x1a0 [ 682.617734] vfs_write+0x231/0x3f0 [ 682.618138] ksys_write+0x63/0xe0 [ 682.618536] do_syscall_64+0x4c/0x100 [ 682.618958] entry_SYSCALL_64_after_hwframe+0x4b/0x53 | |||||
| CVE-2024-50129 | 1 Linux | 1 Linux Kernel | 2024-11-07 | N/A | 7.8 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: net: pse-pd: Fix out of bound for loop Adjust the loop limit to prevent out-of-bounds access when iterating over PI structures. The loop should not reach the index pcdev->nr_lines since we allocate exactly pcdev->nr_lines number of PI structures. This fix ensures proper bounds are maintained during iterations. | |||||
| CVE-2024-50132 | 1 Linux | 1 Linux Kernel | 2024-11-07 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: tracing/probes: Fix MAX_TRACE_ARGS limit handling When creating a trace_probe we would set nr_args prior to truncating the arguments to MAX_TRACE_ARGS. However, we would only initialize arguments up to the limit. This caused invalid memory access when attempting to set up probes with more than 128 fetchargs. BUG: kernel NULL pointer dereference, address: 0000000000000020 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 0 P4D 0 Oops: Oops: 0000 [#1] PREEMPT SMP PTI CPU: 0 UID: 0 PID: 1769 Comm: cat Not tainted 6.11.0-rc7+ #8 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.3-1.fc39 04/01/2014 RIP: 0010:__set_print_fmt+0x134/0x330 Resolve the issue by applying the MAX_TRACE_ARGS limit earlier. Return an error when there are too many arguments instead of silently truncating. | |||||
| CVE-2024-50133 | 1 Linux | 1 Linux Kernel | 2024-11-07 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: LoongArch: Don't crash in stack_top() for tasks without vDSO Not all tasks have a vDSO mapped, for example kthreads never do. If such a task ever ends up calling stack_top(), it will derefence the NULL vdso pointer and crash. This can for example happen when using kunit: [<9000000000203874>] stack_top+0x58/0xa8 [<90000000002956cc>] arch_pick_mmap_layout+0x164/0x220 [<90000000003c284c>] kunit_vm_mmap_init+0x108/0x12c [<90000000003c1fbc>] __kunit_add_resource+0x38/0x8c [<90000000003c2704>] kunit_vm_mmap+0x88/0xc8 [<9000000000410b14>] usercopy_test_init+0xbc/0x25c [<90000000003c1db4>] kunit_try_run_case+0x5c/0x184 [<90000000003c3d54>] kunit_generic_run_threadfn_adapter+0x24/0x48 [<900000000022e4bc>] kthread+0xc8/0xd4 [<9000000000200ce8>] ret_from_kernel_thread+0xc/0xa4 | |||||
| CVE-2022-48996 | 1 Linux | 1 Linux Kernel | 2024-11-07 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: mm/damon/sysfs: fix wrong empty schemes assumption under online tuning in damon_sysfs_set_schemes() Commit da87878010e5 ("mm/damon/sysfs: support online inputs update") made 'damon_sysfs_set_schemes()' to be called for running DAMON context, which could have schemes. In the case, DAMON sysfs interface is supposed to update, remove, or add schemes to reflect the sysfs files. However, the code is assuming the DAMON context wouldn't have schemes at all, and therefore creates and adds new schemes. As a result, the code doesn't work as intended for online schemes tuning and could have more than expected memory footprint. The schemes are all in the DAMON context, so it doesn't leak the memory, though. Remove the wrong asssumption (the DAMON context wouldn't have schemes) in 'damon_sysfs_set_schemes()' to fix the bug. | |||||
| CVE-2022-48991 | 1 Linux | 1 Linux Kernel | 2024-11-07 | N/A | 7.8 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: mm/khugepaged: invoke MMU notifiers in shmem/file collapse paths Any codepath that zaps page table entries must invoke MMU notifiers to ensure that secondary MMUs (like KVM) don't keep accessing pages which aren't mapped anymore. Secondary MMUs don't hold their own references to pages that are mirrored over, so failing to notify them can lead to page use-after-free. I'm marking this as addressing an issue introduced in commit f3f0e1d2150b ("khugepaged: add support of collapse for tmpfs/shmem pages"), but most of the security impact of this only came in commit 27e1f8273113 ("khugepaged: enable collapse pmd for pte-mapped THP"), which actually omitted flushes for the removal of present PTEs, not just for the removal of empty page tables. | |||||
| CVE-2022-48985 | 1 Linux | 1 Linux Kernel | 2024-11-07 | N/A | 4.7 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: net: mana: Fix race on per-CQ variable napi work_done After calling napi_complete_done(), the NAPIF_STATE_SCHED bit may be cleared, and another CPU can start napi thread and access per-CQ variable, cq->work_done. If the other thread (for example, from busy_poll) sets it to a value >= budget, this thread will continue to run when it should stop, and cause memory corruption and panic. To fix this issue, save the per-CQ work_done variable in a local variable before napi_complete_done(), so it won't be corrupted by a possible concurrent thread after napi_complete_done(). Also, add a flag bit to advertise to the NIC firmware: the NAPI work_done variable race is fixed, so the driver is able to reliably support features like busy_poll. | |||||
| CVE-2024-49968 | 1 Linux | 1 Linux Kernel | 2024-11-07 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: ext4: filesystems without casefold feature cannot be mounted with siphash When mounting the ext4 filesystem, if the default hash version is set to DX_HASH_SIPHASH but the casefold feature is not set, exit the mounting. | |||||
| CVE-2024-50004 | 1 Linux | 1 Linux Kernel | 2024-11-07 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: update DML2 policy EnhancedPrefetchScheduleAccelerationFinal DCN35 [WHY & HOW] Mismatch in DCN35 DML2 cause bw validation failed to acquire unexpected DPP pipe to cause grey screen and system hang. Remove EnhancedPrefetchScheduleAccelerationFinal value override to match HW spec. (cherry picked from commit 9dad21f910fcea2bdcff4af46159101d7f9cd8ba) | |||||
| CVE-2024-50005 | 1 Linux | 1 Linux Kernel | 2024-11-07 | N/A | 7.8 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: mac802154: Fix potential RCU dereference issue in mac802154_scan_worker In the `mac802154_scan_worker` function, the `scan_req->type` field was accessed after the RCU read-side critical section was unlocked. According to RCU usage rules, this is illegal and can lead to unpredictable behavior, such as accessing memory that has been updated or causing use-after-free issues. This possible bug was identified using a static analysis tool developed by myself, specifically designed to detect RCU-related issues. To address this, the `scan_req->type` value is now stored in a local variable `scan_req_type` while still within the RCU read-side critical section. The `scan_req_type` is then used after the RCU lock is released, ensuring that the type value is safely accessed without violating RCU rules. | |||||
| CVE-2024-49961 | 1 Linux | 1 Linux Kernel | 2024-11-07 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: media: i2c: ar0521: Use cansleep version of gpiod_set_value() If we use GPIO reset from I2C port expander, we must use *_cansleep() variant of GPIO functions. This was not done in ar0521_power_on()/ar0521_power_off() functions. Let's fix that. ------------[ cut here ]------------ WARNING: CPU: 0 PID: 11 at drivers/gpio/gpiolib.c:3496 gpiod_set_value+0x74/0x7c Modules linked in: CPU: 0 PID: 11 Comm: kworker/u16:0 Not tainted 6.10.0 #53 Hardware name: Diasom DS-RK3568-SOM-EVB (DT) Workqueue: events_unbound deferred_probe_work_func pstate: 80400009 (Nzcv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : gpiod_set_value+0x74/0x7c lr : ar0521_power_on+0xcc/0x290 sp : ffffff8001d7ab70 x29: ffffff8001d7ab70 x28: ffffff80027dcc90 x27: ffffff8003c82000 x26: ffffff8003ca9250 x25: ffffffc080a39c60 x24: ffffff8003ca9088 x23: ffffff8002402720 x22: ffffff8003ca9080 x21: ffffff8003ca9088 x20: 0000000000000000 x19: ffffff8001eb2a00 x18: ffffff80efeeac80 x17: 756d2d6332692f30 x16: 0000000000000000 x15: 0000000000000000 x14: ffffff8001d91d40 x13: 0000000000000016 x12: ffffffc080e98930 x11: ffffff8001eb2880 x10: 0000000000000890 x9 : ffffff8001d7a9f0 x8 : ffffff8001d92570 x7 : ffffff80efeeac80 x6 : 000000003fc6e780 x5 : ffffff8001d91c80 x4 : 0000000000000002 x3 : 0000000000000000 x2 : 0000000000000000 x1 : 0000000000000000 x0 : 0000000000000001 Call trace: gpiod_set_value+0x74/0x7c ar0521_power_on+0xcc/0x290 ... | |||||
| CVE-2024-49964 | 1 Linux | 1 Linux Kernel | 2024-11-07 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: mm/hugetlb: fix memfd_pin_folios free_huge_pages leak memfd_pin_folios followed by unpin_folios fails to restore free_huge_pages if the pages were not already faulted in, because the folio refcount for pages created by memfd_alloc_folio never goes to 0. memfd_pin_folios needs another folio_put to undo the folio_try_get below: memfd_alloc_folio() alloc_hugetlb_folio_nodemask() dequeue_hugetlb_folio_nodemask() dequeue_hugetlb_folio_node_exact() folio_ref_unfreeze(folio, 1); ; adds 1 refcount folio_try_get() ; adds 1 refcount hugetlb_add_to_page_cache() ; adds 512 refcount (on x86) With the fix, after memfd_pin_folios + unpin_folios, the refcount for the (unfaulted) page is 512, which is correct, as the refcount for a faulted unpinned page is 513. | |||||
| CVE-2024-49954 | 1 Linux | 1 Linux Kernel | 2024-11-07 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: static_call: Replace pointless WARN_ON() in static_call_module_notify() static_call_module_notify() triggers a WARN_ON(), when memory allocation fails in __static_call_add_module(). That's not really justified, because the failure case must be correctly handled by the well known call chain and the error code is passed through to the initiating userspace application. A memory allocation fail is not a fatal problem, but the WARN_ON() takes the machine out when panic_on_warn is set. Replace it with a pr_warn(). | |||||
| CVE-2024-49953 | 1 Linux | 1 Linux Kernel | 2024-11-07 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: net/mlx5e: Fix crash caused by calling __xfrm_state_delete() twice The km.state is not checked in driver's delayed work. When xfrm_state_check_expire() is called, the state can be reset to XFRM_STATE_EXPIRED, even if it is XFRM_STATE_DEAD already. This happens when xfrm state is deleted, but not freed yet. As __xfrm_state_delete() is called again in xfrm timer, the following crash occurs. To fix this issue, skip xfrm_state_check_expire() if km.state is not XFRM_STATE_VALID. Oops: general protection fault, probably for non-canonical address 0xdead000000000108: 0000 [#1] SMP CPU: 5 UID: 0 PID: 7448 Comm: kworker/u102:2 Not tainted 6.11.0-rc2+ #1 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014 Workqueue: mlx5e_ipsec: eth%d mlx5e_ipsec_handle_sw_limits [mlx5_core] RIP: 0010:__xfrm_state_delete+0x3d/0x1b0 Code: 0f 84 8b 01 00 00 48 89 fd c6 87 c8 00 00 00 05 48 8d bb 40 10 00 00 e8 11 04 1a 00 48 8b 95 b8 00 00 00 48 8b 85 c0 00 00 00 <48> 89 42 08 48 89 10 48 8b 55 10 48 b8 00 01 00 00 00 00 ad de 48 RSP: 0018:ffff88885f945ec8 EFLAGS: 00010246 RAX: dead000000000122 RBX: ffffffff82afa940 RCX: 0000000000000036 RDX: dead000000000100 RSI: 0000000000000000 RDI: ffffffff82afb980 RBP: ffff888109a20340 R08: ffff88885f945ea0 R09: 0000000000000000 R10: 0000000000000000 R11: ffff88885f945ff8 R12: 0000000000000246 R13: ffff888109a20340 R14: ffff88885f95f420 R15: ffff88885f95f400 FS: 0000000000000000(0000) GS:ffff88885f940000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f2163102430 CR3: 00000001128d6001 CR4: 0000000000370eb0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <IRQ> ? die_addr+0x33/0x90 ? exc_general_protection+0x1a2/0x390 ? asm_exc_general_protection+0x22/0x30 ? __xfrm_state_delete+0x3d/0x1b0 ? __xfrm_state_delete+0x2f/0x1b0 xfrm_timer_handler+0x174/0x350 ? __xfrm_state_delete+0x1b0/0x1b0 __hrtimer_run_queues+0x121/0x270 hrtimer_run_softirq+0x88/0xd0 handle_softirqs+0xcc/0x270 do_softirq+0x3c/0x50 </IRQ> <TASK> __local_bh_enable_ip+0x47/0x50 mlx5e_ipsec_handle_sw_limits+0x7d/0x90 [mlx5_core] process_one_work+0x137/0x2d0 worker_thread+0x28d/0x3a0 ? rescuer_thread+0x480/0x480 kthread+0xb8/0xe0 ? kthread_park+0x80/0x80 ret_from_fork+0x2d/0x50 ? kthread_park+0x80/0x80 ret_from_fork_asm+0x11/0x20 </TASK> | |||||
| CVE-2022-48998 | 1 Linux | 1 Linux Kernel | 2024-11-07 | N/A | 7.8 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: powerpc/bpf/32: Fix Oops on tail call tests test_bpf tail call tests end up as: test_bpf: #0 Tail call leaf jited:1 85 PASS test_bpf: #1 Tail call 2 jited:1 111 PASS test_bpf: #2 Tail call 3 jited:1 145 PASS test_bpf: #3 Tail call 4 jited:1 170 PASS test_bpf: #4 Tail call load/store leaf jited:1 190 PASS test_bpf: #5 Tail call load/store jited:1 BUG: Unable to handle kernel data access on write at 0xf1b4e000 Faulting instruction address: 0xbe86b710 Oops: Kernel access of bad area, sig: 11 [#1] BE PAGE_SIZE=4K MMU=Hash PowerMac Modules linked in: test_bpf(+) CPU: 0 PID: 97 Comm: insmod Not tainted 6.1.0-rc4+ #195 Hardware name: PowerMac3,1 750CL 0x87210 PowerMac NIP: be86b710 LR: be857e88 CTR: be86b704 REGS: f1b4df20 TRAP: 0300 Not tainted (6.1.0-rc4+) MSR: 00009032 <EE,ME,IR,DR,RI> CR: 28008242 XER: 00000000 DAR: f1b4e000 DSISR: 42000000 GPR00: 00000001 f1b4dfe0 c11d2280 00000000 00000000 00000000 00000002 00000000 GPR08: f1b4e000 be86b704 f1b4e000 00000000 00000000 100d816a f2440000 fe73baa8 GPR16: f2458000 00000000 c1941ae4 f1fe2248 00000045 c0de0000 f2458030 00000000 GPR24: 000003e8 0000000f f2458000 f1b4dc90 3e584b46 00000000 f24466a0 c1941a00 NIP [be86b710] 0xbe86b710 LR [be857e88] __run_one+0xec/0x264 [test_bpf] Call Trace: [f1b4dfe0] [00000002] 0x2 (unreliable) Instruction dump: XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX ---[ end trace 0000000000000000 ]--- This is a tentative to write above the stack. The problem is encoutered with tests added by commit 38608ee7b690 ("bpf, tests: Add load store test case for tail call") This happens because tail call is done to a BPF prog with a different stack_depth. At the time being, the stack is kept as is when the caller tail calls its callee. But at exit, the callee restores the stack based on its own properties. Therefore here, at each run, r1 is erroneously increased by 32 - 16 = 16 bytes. This was done that way in order to pass the tail call count from caller to callee through the stack. As powerpc32 doesn't have a red zone in the stack, it was necessary the maintain the stack as is for the tail call. But it was not anticipated that the BPF frame size could be different. Let's take a new approach. Use register r4 to carry the tail call count during the tail call, and save it into the stack at function entry if required. This means the input parameter must be in r3, which is more correct as it is a 32 bits parameter, then tail call better match with normal BPF function entry, the down side being that we move that input parameter back and forth between r3 and r4. That can be optimised later. Doing that also has the advantage of maximising the common parts between tail calls and a normal function exit. With the fix, tail call tests are now successfull: test_bpf: #0 Tail call leaf jited:1 53 PASS test_bpf: #1 Tail call 2 jited:1 115 PASS test_bpf: #2 Tail call 3 jited:1 154 PASS test_bpf: #3 Tail call 4 jited:1 165 PASS test_bpf: #4 Tail call load/store leaf jited:1 101 PASS test_bpf: #5 Tail call load/store jited:1 141 PASS test_bpf: #6 Tail call error path, max count reached jited:1 994 PASS test_bpf: #7 Tail call count preserved across function calls jited:1 140975 PASS test_bpf: #8 Tail call error path, NULL target jited:1 110 PASS test_bpf: #9 Tail call error path, index out of range jited:1 69 PASS test_bpf: test_tail_calls: Summary: 10 PASSED, 0 FAILED, [10/10 JIT'ed] | |||||